|
|
AML Shipping Services
AML Shipping Services encompass a wide range of Shipping and Logistics related Services, from the arrangement of;
Ship Chartering, Bulk Fuel & Cargo Logistics, Ship Sales, Vessel Leasing, Ship Sale-Leaseback, including Vessel Finance, and Insurance.
Ship Chartering, Bulk Fuel & Cargo Logistics, Ship Sales, Vessel Leasing, Ship Sale-Leaseback, including Vessel Finance, and Insurance.
Shipping/Maritime Terms & Chartering Glossary's:
Glossary of Maritime Terms;
A;
ABS: The American Bureau of Shipping is a U.S. classification society that certifies if a ship is in compliance with standard rules of construction and maintenance.
Anchorage: Port charge relating to a vessel moored at approved anchorage site in a harbor.
Apron: The area immediately in front of or behind a wharf shed on which cargo is lifted. On the "front apron," cargo is unloaded from or loaded onto a ship. Behind the shed, cargo moves over the "rear apron" into and out of railroad cars.
B;
Backhaul: To haul a shipment back over part of a route which it has already traveled; a marine transportation carrier’s return movement of cargo, usually opposite from the direction of its primary cargo distribution.
Barge: A large, flat-bottomed boat used to carry cargo from a port to shallow-draft waterways. Barges have no locomotion and are pushed by towboats. A single, standard barge can hold 1,500 tons of cargo or as much as either 15 railroad cars or 60 trucks can carry. A barge is 200 feet long, 35 feet wide and has a draft of 9 feet. Barges carry dry bulk (grain, coal, lumber, gravel, etc.) and liquid bulk (petroleum, vegetable oils, molasses, etc.).
Berth: (verb) To bring a ship to a berth. (noun) The wharf space at which a ship docks. A wharf may have two or three berths, depending on the length of incoming ships.
Bill of lading [BOL]: A contract between a shipper and carrier listing the terms for moving freight between specified points.
Board of Commissioners: The members of the governing board of a port authority are called commissioners. Members of a Board of Commissioners can be elected or appointed and usually serve for several years.
Bollard: A line-securing device on a wharf around which mooring and berthing lines are fastened.
Bonded warehouse: A building designated by U.S. Customs authorities for storage of goods without payment of duties to Customs until goods are removed.
Box: Slang term for a container.
Breakbulk cargo: Non-containerized general cargo stored in boxes, bales, pallets or other units to be loaded onto or discharged from ships or other forms of transportation. (See also: bulk and container.) Examples include iron, steel, machinery, linerboard and woodpulp.
Bulk cargo: Loose cargo (dry or liquid) that is loaded (shoveled, scooped, forked, mechanically conveyed or pumped) in volume directly into a ship’s hold; e.g., grain, coal and oil.
Bulkhead: A structure used to protect against shifting cargo and/or to separate the load.
Buoys: Floats that warn of hazards such as rocks or shallow ground, to help ships maneuver through unfamiliar harbors.
C;
Cabotage: Shipment of cargo between a nation’s ports is also called coastwise trade. The U.S. and some other countries require such trade to be carried on domestic ships only.
Capacity: The available space for, or ability to handle, freight.
Captive cargo port: When most of a port’s inbound cargoes are being shipped short distances and most of its export products come from nearby areas, the port is called a captive cargo port. (Contrast with a transit port.)
Cargo: The freight (goods, products) carried by a ship, barge, train, truck or plane.
Carrier: An individual, partnership or corporation engaged in the business of transporting goods or passengers (See also: ocean carrier.)
Cartage: Originally the process of transporting by cart. Today, the term is used for trucking or trucking fees.
Chandlers: Like a hotel at sea, a ship needs many supplies to operate and serve its crew-- groceries; paper products; engine parts; electronics; hardware; etc. A chandler sells these supplies to the ship’s agent. Originally, chandlers (candle makers) provided illumination to ships. Over time they expanded the variety of products they could provide to ships.
Channels of distribution: The routes by which products are transported from origin to destination. This includes the physical routes, as well as the different companies involved in ultimately delivering the goods to buyers.
Checkers: See clerks.
Chock: A piece of wood or other material put next to cargo to prevent it from shifting.
Civil service: Some U.S., state, city and parish government jobs are protected under civil service systems which are designed to provide a degree of security to employees and to deter nepotism, political patronage and arbitrary treatment of workers.
Clerks: When cargo is unloaded from a ship, a clerk checks the actual count of the goods (number of boxes, drums, bundles, pipes, etc.) versus the amount listed on the ship’s manifest. He will note shortages, overages or damage. This is used to make claims if needed.
Common carrier: Trucking, railroad or barge lines that are licensed to transport goods or people nationwide are called common carriers.
Conference rate: Rates arrived at by conference of carriers applicable to water transportation.
Consignment: A shipment of goods. The buyer of this shipment is called the consignee; the seller of the goods is called the consignor.
Consolidated Freight Station or Container Freight Station (CFS)- Location on terminal grounds where stuffing and stripping of containers is conducted.
Consolidator: The person or firm that consolidates (combines) cargo from a number of shippers into a container that will deliver the goods to several buyers.
Container: A box made of aluminum, steel or fiberglass used to transport cargo by ship, rail, truck or barge. Common dimensions are 20' x 8’ x 8' (called a TEU or twenty-foot equivalent unit) or 40' x 8' x 8', called an FEU. Variations are collapsible containers, tank containers (for liquids) and "rag tops" (open-topped containers covered by a tarpaulin for cargo that sticks above the top of a closed box). In the container industry, containers are usually simply called boxes.
Container freight station: The facility for stuffing and stripping a container of its cargo, especially for movement by railroad.
Container chassis: A piece of equipment specifically designed for the movement of containers by highway to and from container terminals.
Container crane: Usually, a rail-mounted gantry crane located on a wharf for the purpose of loading and unloading containers on vessels.
Container terminal: A specialized facility where ocean container vessels dock to discharge and load containers, equipped with cranes with a safe lifting capacity of 35-40 tons, with booms having an outreach of up to 120 feet in order to reach the outside cells of vessels. Most such cranes operate on rail tracks and have articulating rail trucks on each of their four legs, enabling them to traverse along the terminal and work various bays on the vessel and for more than one crane to work a single vessel simultaneously. Most terminals have direct rail access and container storage areas, and are served by highway carriers.
Containerization: The technique of using a container to store, protect and handle cargo while it is in transit. This shipping method has both greatly expedited the speed at which cargo is moved from origin to destination and lowered shipping costs.
Container on Flat Car (COFC)- A container placed directly on a railroad flatcar without chassis.
contraband: Goods prohibited in trade (such as weapons going to Iran, anything to Cuba). Smuggled goods.
Corps of Engineers: This department of the U. S. Army is responsible for flood protection and providing safe navigation channels. The Corps builds and maintains the levees, flood walls and spillways that keep major rivers out of low lying communities. The Corps is vital to keeping navigation channels open by dredging sand, silt and gravel that accumulate on river and harbor bottoms.
Craft: A boat, ship or airplane.
Customs: A duty or tax on imported goods. These fees are a major bonus to the economy. In 1999, for example, the U. S. Customs Department collected over $22 billion in fees nationally, which went into the U.S. Treasury. The Customs Department also works to prevent the importation of illegal drugs and contraband.
Customs broker: This person prepares the needed documentation for importing goods (just as a freight forwarder does for exports). The broker is licensed by the Treasury Department to clear goods through U.S. Customs. Performs duties related to documentation, cargo clearance, coordination of inland and ocean transportation, dockside inspection of cargo, etc. (Also known as a customhouse broker.)
D;
Dead Weight Tonnage (DWT): Maximum weight of a vessel including the vessel, cargo and ballast.
Deadhead: When a truck returning from a delivery has no return freight on the back haul, it is said to be in deadhead.
Deck barge: Transports heavy or oversize cargoes mounted to its top deck instead of inside a hold. Machinery, appliances, project cargoes and even recreational vehicles move on deck barges.
Demurrage: A penalty fee assessed when cargo isn’t moved off a wharf before the free time allowance ends.
Dock: (verb) - To bring in a vessel to tie up at a wharf berth. (One parks a car, but docks a ship.) (noun) - A dock is a structure built along, or at an angle from, a navigable waterway so that vessels may lie alongside to receive or discharge cargo. Sometimes, the whole wharf is informally called a dock.
Dockage: A charge by a port authority for the length of water frontage used by a vessel tied up at a wharf.
Draft: The depth of a loaded vessel in the water taken from the level of the waterline to the lowest point of the hull of the vessel; depth of water, or distance between the bottom of the ship and waterline.
Drayage: Transport by truck for short distances; e.g. from wharf to warehouse..
Dredge: (noun) A waterborne machine that removes unwanted silt accumulations from the bottom of a waterway. (verb) The process of removing sediment from harbor or river bottoms for safety purposes and to allow for deeper vessels.
Dry bulk: Minerals or grains stored in loose piles moving without mark or count.
Examples are potash, industrial sands, wheat, soybeans and peanuts.
Dunnage: Wood or other material used in stowing ship cargo to prevent its movement.
Duty: A government tax on imported merchandise.
E;
Electronic Data Interchange (EDI): The exchange of information through an electronic format. Electronic commerce has been under intensive development in the transportation industry to achieve a competitive advantage in international markets.
Elevator: A complex including storage facilities, computerized loading; inspection rooms and docks to load and unload dry bulk cargo such as grain or green coffee.
Export packers: Firms that securely pack export products into a container to crate to protect the cargo from damage during an ocean voyage.
F;
Feeder service: Ocean transport system involving use of centralized ports to assemble and disseminate cargo to and from ports within a geographic area. Commodities are transported between major ports, then transferred to feeder vessels for further transport to a number of additional ports.
Fender piles: The wooden or plastic pilings on the outer edge of the wharf function like the fenders on a car. They are there to absorb the shock of a ship as it docks at the wharf and to protect the structural pilings that actually support the wharf. Fender piles are also called sacrifice piles since they are designed to be discarded after they are broken.
Fleeting: The area at which barges, towboats and tugs are berthed until needed. The operation of building or dismantling barge tows.
Foreign Trade Zone (FTZ) - Known in some countries as a free zone, a foreign trade zone (FTZ) is a site within the USA (in or near a U.S. Customs port of entry) where foreign and domestic goods are held until they ready to be released into international commerce. If the final product is imported into the U.S., duties and taxes are not due until the goods are release into the U.S. market. Merchandise may enter a FTZ without a formal Customs entry or the payment of Customs duties or government excise taxes. In the zone, goods may be: stored; tested; sampled; repackaged or relabeled; cleaned; combined with other products; repaired or assembled, etc.
Freight: Merchandise hauled by transportation lines.
Freight forwarder: An individual or company that prepares the documentation and coordinates the movement and storage of export cargoes. See also Customs house broker.
G;
Gantry crane: Track-mounted, shoreside crane utilized in the loading and unloading of breakbulk cargo, containers and heavy lift cargo.
General cargo: Consists of both containerized and breakbulk goods, in contrast to bulk cargo. See: breakbulk, container, bulk, dry bulk). General cargo operations produce more jobs than bulk handling.
Grain elevator: Facility at which bulk grain is unloaded, weighed, cleaned, blended and exported.
Gross tonnage: The sum of container, breakbulk and bulk tonnage.
H;
Harbor: A port of haven where ships may anchor.
Heavy hauler: A truck equipped to transport unusually heavy cargoes (steel slabs, bulldozers, transformers, boats, heavy machinery, etc.)
Heavy lift: Very heavy cargoes that require specialized equipment to move the products to and from ship/truck/rail/barge and terminals. This "heavy lift" machinery may be installed aboard a ship designed just for such transport. Shore cranes, floating cranes and lift trucks may also adapted for such heavy lifts.
Home port: Port from which a cruise ship loads passengers and begins its itinerary, and to which it returns to disembark passengers upon conclusion of voyage. Sometimes referred to as "embarkation port" and "turn around port."
Hopper car: A freight car used for handling dry bulks, with an openable top and one or more openings on the bottom through which the cargo is dumped.
Hostler (or hustler): A tractor, usually unlicensed, for moving containers within a yard. An employees who drives a tractor for the purpose of moving cargo within a container yard.
I;
Interchange: Point of entry/exit for trucks delivering and picking up containerized cargo. Point where pickups and deposits of containers in storage area or yard are assigned.
I.L.A. - International Longshoremen’s Association, which operates on the East and Gulf Coasts. See labor unions and longshoremen.
I.L.W.U.- International Longshore and Warehouse Union, which operates on the West Coast. See labor unions and longshoremen.
Intermodal shipment: When more than one mode of transportation is used to ship cargo from origin to destination, it is called intermodal transportation. For example, boxes of hot sauce from Louisiana are stuffed into metal boxes called containers at the factory. That container is put onto a truck chassis (or a railroad flat car) and moved to a port. There the container is lifted off the vehicle and lifted onto a ship. At the receiving port, the process is reversed. Intermodal transportation uses few laborers and speeds up the delivery time.
IMX: This is transportation shorthand for intermodal exchange. In an IMX yard, containers can be lifted from truck chassis to rail intermodal cars or vice versa.
ISO: International Organization for Standardization. Worldwide organization formed to promote development of standards to facilitate the international carriage and exchange of goods and services. Governs construction specifications for ISO containers.
J;
JIT: The abbreviation for "just in time," which is a way to minimize warehousing costs by having cargo shipped to arrive just in time for its use. This inventory control method depends on extremely reliable transportation.
L;
Labor union: An organization of workers formed to serve members’ collective interests with regard to wages and working conditions. The maritime unions within ports can include locals of the larger union, such as the General Longshore Workers; Clerks and Checkers; Sack-sewers, Sweepers, Water boys and Coopers; Dock Loaders and Unloaders of Freight Cars and Barges; Dray Clerks, Weighers and Samplers; plus the Seafarer’s International Union; the National Maritime Union; the Marine Engineers’ Beneficial Association and the Teamsters. Some laborers don’t belong to a union.
Landlord port: At a landlord port, the port authority builds the wharves, which it then rents or leases to a terminal operator (usually a stevedoring company). The operator invests in cargo-handling equipment (forklifts, cranes, etc), hires longshore laborers to operate such lift machinery and negotiates contracts with ocean carriers (steamship services) to handle the unloading and loading of ship cargoes. (See also: operating port.)
LASH: These 900-foot-long ships carry small barges inside the vessel. LASH stands for Lighter Aboard Ship. Just as cargo is transported by barge from the shallower parts of the Mississippi River to the Port of New Orleans for export aboard ocean-going ships, LASH barges are lifted into these unusual ships. Overseas, the ship can discharge clusters of barges in the open waters. Then several towboats will assemble the barges into tows bound for various ports and inland waterways, without the ship having to spend time traveling to each port.
Launch service: Companies that offer "water-taxi" service to ships at anchor.
LCL: The acronym for "less than container load." It refers to a partial container load that is usually consolidated with other goods to fill a container.
Length Overall (LOA): Linear measurement of a vessel from bow to stern.
Lift On-Lift Off (LO/LO): Cargo handling technique involving transfer of commodities to and from the ship using shoreside cranes or ship's gear.
LTL: Means a shipment that is "less than truckload". Cargoes from different sources are usually consolidated to save costs.
Long ton: A long ton equals 2240 pounds.
Longshoremen: Dock workers who load and unload ships, or perform administrative tasks associated with the loading or unloading of cargo. They may or may not be members of labor unions. Longshore gangs are hired by stevedoring firms to work the ships. Longshoremen are also called stevedores.
M;
Manifest: The ship captain’s list of individual goods that make up the ship’s cargo.
Marine surveyor: Person who inspects a ship hull or its cargo for damage or quality.
Master: The officer in charge of the ship. "Captain" is a courtesy title often given to a master.
Maritime: (adjective) Located on or near the sea. Commerce or navigation by sea. The maritime industry includes people working for transportation (ship, rail, truck and towboat/barge) companies, freight forwarders and customs brokers; stevedoring companies; labor unions; chandlers; warehouses; ship building and repair firms; importers/exporters; pilot associations, etc.
Marshaling yard: This is a container parking lot, or any open area where containers are stored in a precise order according to the ship loading plan. Containers terminals may use a grounded or wheeled layout. If the cargo box is placed directly on the ground, it is called a grounded operation. If the box is on a chassis/trailer, it is a wheeled operation.
Mean low water (MLW): Lowest average level water reaches on an outgoing tide.
Mean high water (MHW): Highest average level water reaches on an outgoing tide.
Mooring dolphin: A cluster of pilings to which a boat or barge ties up.
Motor ship (MS) or motor vessel (MV): A ship propelled by internal-combustion engines.
N;
NVOCC: A non-vessel-owning common carrier that buys space aboard a ship to get a lower volume rate. An NVOCC then sells that space to various small shippers, consolidates their freight, issues bills of lading and books space aboard a ship.
Neo-bulk cargo: Uniformly packaged goods, such as wood pulp bales, which stow as solidly as bulk, but are handled as general cargoes.
O;
Ocean carrier: Diesel-fueled vessels have replaced the old steamships of the past, although many people still refer to modern diesel ships as steamships. Likewise, the person who represents the ship in port is still often called a steamship agent. (See: steamship agent)
On-dock rail: Direct shipside rail service. Includes the ability to load and unload containers/breakbulk directly from rail car to vessel.
On-terminal rail: Rail service and trackage provided by a railroad within a designated terminal area.
Operating port: At an operational port like Charleston, South Carolina, the port authority builds the wharves, owns the cranes and cargo-handling equipment and hires the labor to move cargo in the sheds and yards. A stevedore hires longshore labor to lift cargo between the ship and the dock, where the port’s laborers pick it up and bring it to the storage site. (See landlord port.)
P;
Pallet: A short wooden, metal or plastic platform on which package cargo is placed, then handled by a forklift truck.
Pier: A structure which just out into a waterway from the shore, for mooring vessels and cargo handling. Sometimes called a finger pier.
Piggyback: A rail transport mode where a loaded truck trailer is shipped on a rail flatcar.
Pilot: A licensed navigational guide with thorough knowledge of a particular section of a waterway whose occupation is to steep ships along a coast or into and out of a harbor. Local pilots board the ship to advise the captain and navigator of local navigation conditions (difficult currents; hidden wrecks, etc.).
Port: This term is used both for the harbor area where ships are docked and for the agency (port authority), which administers use of public wharves and port properties.
Port-of-call: Port at which cruise ship makes a stop along its itinerary. Calls may range from five to 24 hours. Sometimes referred to as "transit port" and "destination port." (See also: home port)
Project cargo: The materials and equipment to assemble a special project overseas, such as a factory or highway.
Q;
Quay: A wharf, which parallels the waterline.
R;
Railhead: End of the railroad line or point in the area of operations at which cargo is loaded and unloaded.
Railyard: A rail terminal at which occur traditional railroad activities for sorting and redistribution of railcars and cargo.
Reefer: A container with refrigeration for transporting frozen foods (meat, ice cream, fruit, etc.)
Refrigeration or reefer units: The protective cooling of perishable freight by ice, liquid nitrogen, or mechanical devices
Ro/Ro: Short for roll on/roll/off . A ro/ro ship is designed with ramps that can be lowered to the dock so cars, buses, trucks or other vehicles can drive into the belly of the ship, rather than be lifted aboard. A ro/ro ship, like a container ship, has a quick turnaround time of about 12 hours.
Rubber-Tired Gantry (RTG): Traveling crane used for the movement and positioning of containers in a container field. RTG's may also be used for loading and unloading containers from rail cars.
S;
Sheddage: Regardless of the length of stay, a vessel is charged a one-time fee for use of shed space and/or marginal (waterside) rail track space. The charge is based on the length of a vessel.
Short ton: A short ton equals 2,000. Lifting capacity and cargo measurements are designated in short tons.
Spreader: a device for lifting containers by their corner posts. The spreader bar on a container crane is telescopic to allow lifting various length containers.
Steamship: Today, ships that transport cargo overseas are powered by diesel fuel instead of steam. Many people still use the term "steamship," but the more modern term for the service is "ocean carrier" and for the ship itself, "motor vessel."
Steamship agent: The local representative who acts as a liaison among ship owners, local port authorities, terminals and supply/service companies. An agent handles all details for getting the ship into port; having it unloaded and loaded; inspected and out to sea quickly. An agent arranges for pilots; tug services; stevedores; inspections, etc., as well as, seeing that a ship is supplied with food, water, mail, medical services, etc. A steamship agency does not own the ship.
Steamship company: A business that owns ships that operate in international trade .
Steamship line: A steamship (ocean carrier) service running on a particular international route. Examples: NSCSA (National Shipping Company of Saudi Arabia), American President Lines (APL), Maersk Sealand, Evergreen, etc.
Stevedores: Labor management companies that provide equipment and hire workers to transfer cargo between ships and docks. Stevedore companies may also serve as terminal operators. The laborers hired by the stevedoring firms are called stevedores or longshoremen.
Straddle carrier: Container terminal equipment, which is motorized and runs on rubber tires. It can straddle a single row of containers and is primarily used to move containers around the terminal, but also to transport containers to and from the transtainer and load/unload containers from truck chassis.
Stripping: The process of removing cargo from a container.
Stuffing: The process of packing a container with loose cargo prior to inland or ocean shipment.
T;
Tank barges: Used for transporting bulk liquids, such as petroleum, chemicals, molasses, vegetable oils and liquefied gases.
Tariff: Schedule, system of duties imposed by a government on the import/export of goods; also, the charges, rates and rules of a transportation company as listed in published industry tables.
Terminal: The place where cargo is handled is called a terminal (or a wharf).
Terminal operator: The company that operates cargo handling activities on a wharf . A terminal operator oversees unloading cargo from ship to dock, checking the quantity of cargoes versus the ship’s manifest (list of goods), transferring of the cargo into the shed, checking documents authorizing a trucker to pick up cargo, overseeing the loading/unloading of railroad cars, etc.
Toplift: A piece of equipment similar to a forklift that lifts from above rather than below. Used to handle containers in the storage yard to and from storage stacks, trucks and railcars.
Towboat: A snub-nosed boat with push knees used for pushing barges. A small towboat (called a push boat) may push one or two barges around the harbor. A large towboat is used to push from 5 to 40 barges in a tow is called a line boat. From the Port of New Orleans, line boats deliver cargo to Mid-America via the 14,500-mile waterway system flowing through the Crescent City.
(See also tug boat)
Tractor-trailer: Some trucks are a solid unit, such as a van, but many have three main units. The front section where the driver sits is called the cab or the tractor (because it pulls a load). Cargo is loaded into the metal box (container), which is loaded onto the wheel base called a chassis or a trailer. These big trucks are often also called 18-wheelers.
Trailer On Flat Car (TOFC): A container placed on a chassis that is in turn placed on a railroad car.
Tramp: A ship operating with no fixed route or published schedule.
Transit port: When the majority of cargoes moving through a port aren’t coming from or destined for the local market, the port is called a transit (or through) port.
Transit shed: The shed on a wharf is designed to protect cargoes from weather damage and is used only for short-term storage. Warehouses operated by private firms house goods for longer periods.
Trans-shipment: The unloading of cargo at a port or point where it is then reloaded, sometimes into another mode of transportation, for transfer to a final destination.
Transtainer: A type of crane used in the handling of containers, which is motorized, mounted on rubber tires and can straddle at least four railway tracks, some up to six, with a lifting capacity of 35 tons for loading and unloading containers to and from railway cards.
Trucks: Heavy automotive vehicles used to transport cargo. In the maritime industry, cargo is often carried by tractor-trailers. The tractor is the front part of the vehicle, also called a cab. The trailer is the detachable wheeled chassis behind the tractor, on which containers or other cargoes are placed. (See: common carrier; heavy hauler; drayage)
Tugboat: Strong v-hull shaped boat used for maneuvering ships into and out of port and to carry supplies. A ship is too powerful to pull up to the wharf on its own. It cuts power and lets the tug nudge it in. Generally barges are pushed by towboats, not tugs.
Twenty Foot Equivalent Unit (TEU): A unit of measurement equal to the space occupied by a standard twenty foot container. Used in stating the capacity of container vessel or storage area. One 40 ft. Container is equal to two TEU's.
U;
U. S. Army Corps of Engineers: See Corps of Engineers.
U. S. Customs: See Customs.
V;
Vessel: A ship or large boat.
Vessel operator: A firm that charters vessels for its service requirements, which are handled by their own offices or appointed agents at ports of call. Vessel operators also handle the operation of vessels on behalf of owners.
W;
Warehouse: A place in which goods or merchandise is stored.
Way bill: The document used to identify the shipper and consignee, present the routing, describe the goods, present the applicable rate, show the weight of the shipment, and make other useful information notations.
Wharf: The place at which ships tie up to unload and load cargo. The wharf typically has front and rear loading docks (aprons), a transit shed, open (unshedded) storage areas, truck bays, and rail tracks.
Wharfage fee: A charge assessed by a pier or wharf owner for handling incoming or outgoing cargo.
Y;
Yard: a system of tracks within a certain area used for making up trains, storing cars, placing cars to be loaded or unloaded, etc.
A;
ABS: The American Bureau of Shipping is a U.S. classification society that certifies if a ship is in compliance with standard rules of construction and maintenance.
Anchorage: Port charge relating to a vessel moored at approved anchorage site in a harbor.
Apron: The area immediately in front of or behind a wharf shed on which cargo is lifted. On the "front apron," cargo is unloaded from or loaded onto a ship. Behind the shed, cargo moves over the "rear apron" into and out of railroad cars.
B;
Backhaul: To haul a shipment back over part of a route which it has already traveled; a marine transportation carrier’s return movement of cargo, usually opposite from the direction of its primary cargo distribution.
Barge: A large, flat-bottomed boat used to carry cargo from a port to shallow-draft waterways. Barges have no locomotion and are pushed by towboats. A single, standard barge can hold 1,500 tons of cargo or as much as either 15 railroad cars or 60 trucks can carry. A barge is 200 feet long, 35 feet wide and has a draft of 9 feet. Barges carry dry bulk (grain, coal, lumber, gravel, etc.) and liquid bulk (petroleum, vegetable oils, molasses, etc.).
Berth: (verb) To bring a ship to a berth. (noun) The wharf space at which a ship docks. A wharf may have two or three berths, depending on the length of incoming ships.
Bill of lading [BOL]: A contract between a shipper and carrier listing the terms for moving freight between specified points.
Board of Commissioners: The members of the governing board of a port authority are called commissioners. Members of a Board of Commissioners can be elected or appointed and usually serve for several years.
Bollard: A line-securing device on a wharf around which mooring and berthing lines are fastened.
Bonded warehouse: A building designated by U.S. Customs authorities for storage of goods without payment of duties to Customs until goods are removed.
Box: Slang term for a container.
Breakbulk cargo: Non-containerized general cargo stored in boxes, bales, pallets or other units to be loaded onto or discharged from ships or other forms of transportation. (See also: bulk and container.) Examples include iron, steel, machinery, linerboard and woodpulp.
Bulk cargo: Loose cargo (dry or liquid) that is loaded (shoveled, scooped, forked, mechanically conveyed or pumped) in volume directly into a ship’s hold; e.g., grain, coal and oil.
Bulkhead: A structure used to protect against shifting cargo and/or to separate the load.
Buoys: Floats that warn of hazards such as rocks or shallow ground, to help ships maneuver through unfamiliar harbors.
C;
Cabotage: Shipment of cargo between a nation’s ports is also called coastwise trade. The U.S. and some other countries require such trade to be carried on domestic ships only.
Capacity: The available space for, or ability to handle, freight.
Captive cargo port: When most of a port’s inbound cargoes are being shipped short distances and most of its export products come from nearby areas, the port is called a captive cargo port. (Contrast with a transit port.)
Cargo: The freight (goods, products) carried by a ship, barge, train, truck or plane.
Carrier: An individual, partnership or corporation engaged in the business of transporting goods or passengers (See also: ocean carrier.)
Cartage: Originally the process of transporting by cart. Today, the term is used for trucking or trucking fees.
Chandlers: Like a hotel at sea, a ship needs many supplies to operate and serve its crew-- groceries; paper products; engine parts; electronics; hardware; etc. A chandler sells these supplies to the ship’s agent. Originally, chandlers (candle makers) provided illumination to ships. Over time they expanded the variety of products they could provide to ships.
Channels of distribution: The routes by which products are transported from origin to destination. This includes the physical routes, as well as the different companies involved in ultimately delivering the goods to buyers.
Checkers: See clerks.
Chock: A piece of wood or other material put next to cargo to prevent it from shifting.
Civil service: Some U.S., state, city and parish government jobs are protected under civil service systems which are designed to provide a degree of security to employees and to deter nepotism, political patronage and arbitrary treatment of workers.
Clerks: When cargo is unloaded from a ship, a clerk checks the actual count of the goods (number of boxes, drums, bundles, pipes, etc.) versus the amount listed on the ship’s manifest. He will note shortages, overages or damage. This is used to make claims if needed.
Common carrier: Trucking, railroad or barge lines that are licensed to transport goods or people nationwide are called common carriers.
Conference rate: Rates arrived at by conference of carriers applicable to water transportation.
Consignment: A shipment of goods. The buyer of this shipment is called the consignee; the seller of the goods is called the consignor.
Consolidated Freight Station or Container Freight Station (CFS)- Location on terminal grounds where stuffing and stripping of containers is conducted.
Consolidator: The person or firm that consolidates (combines) cargo from a number of shippers into a container that will deliver the goods to several buyers.
Container: A box made of aluminum, steel or fiberglass used to transport cargo by ship, rail, truck or barge. Common dimensions are 20' x 8’ x 8' (called a TEU or twenty-foot equivalent unit) or 40' x 8' x 8', called an FEU. Variations are collapsible containers, tank containers (for liquids) and "rag tops" (open-topped containers covered by a tarpaulin for cargo that sticks above the top of a closed box). In the container industry, containers are usually simply called boxes.
Container freight station: The facility for stuffing and stripping a container of its cargo, especially for movement by railroad.
Container chassis: A piece of equipment specifically designed for the movement of containers by highway to and from container terminals.
Container crane: Usually, a rail-mounted gantry crane located on a wharf for the purpose of loading and unloading containers on vessels.
Container terminal: A specialized facility where ocean container vessels dock to discharge and load containers, equipped with cranes with a safe lifting capacity of 35-40 tons, with booms having an outreach of up to 120 feet in order to reach the outside cells of vessels. Most such cranes operate on rail tracks and have articulating rail trucks on each of their four legs, enabling them to traverse along the terminal and work various bays on the vessel and for more than one crane to work a single vessel simultaneously. Most terminals have direct rail access and container storage areas, and are served by highway carriers.
Containerization: The technique of using a container to store, protect and handle cargo while it is in transit. This shipping method has both greatly expedited the speed at which cargo is moved from origin to destination and lowered shipping costs.
Container on Flat Car (COFC)- A container placed directly on a railroad flatcar without chassis.
contraband: Goods prohibited in trade (such as weapons going to Iran, anything to Cuba). Smuggled goods.
Corps of Engineers: This department of the U. S. Army is responsible for flood protection and providing safe navigation channels. The Corps builds and maintains the levees, flood walls and spillways that keep major rivers out of low lying communities. The Corps is vital to keeping navigation channels open by dredging sand, silt and gravel that accumulate on river and harbor bottoms.
Craft: A boat, ship or airplane.
Customs: A duty or tax on imported goods. These fees are a major bonus to the economy. In 1999, for example, the U. S. Customs Department collected over $22 billion in fees nationally, which went into the U.S. Treasury. The Customs Department also works to prevent the importation of illegal drugs and contraband.
Customs broker: This person prepares the needed documentation for importing goods (just as a freight forwarder does for exports). The broker is licensed by the Treasury Department to clear goods through U.S. Customs. Performs duties related to documentation, cargo clearance, coordination of inland and ocean transportation, dockside inspection of cargo, etc. (Also known as a customhouse broker.)
D;
Dead Weight Tonnage (DWT): Maximum weight of a vessel including the vessel, cargo and ballast.
Deadhead: When a truck returning from a delivery has no return freight on the back haul, it is said to be in deadhead.
Deck barge: Transports heavy or oversize cargoes mounted to its top deck instead of inside a hold. Machinery, appliances, project cargoes and even recreational vehicles move on deck barges.
Demurrage: A penalty fee assessed when cargo isn’t moved off a wharf before the free time allowance ends.
Dock: (verb) - To bring in a vessel to tie up at a wharf berth. (One parks a car, but docks a ship.) (noun) - A dock is a structure built along, or at an angle from, a navigable waterway so that vessels may lie alongside to receive or discharge cargo. Sometimes, the whole wharf is informally called a dock.
Dockage: A charge by a port authority for the length of water frontage used by a vessel tied up at a wharf.
Draft: The depth of a loaded vessel in the water taken from the level of the waterline to the lowest point of the hull of the vessel; depth of water, or distance between the bottom of the ship and waterline.
Drayage: Transport by truck for short distances; e.g. from wharf to warehouse..
Dredge: (noun) A waterborne machine that removes unwanted silt accumulations from the bottom of a waterway. (verb) The process of removing sediment from harbor or river bottoms for safety purposes and to allow for deeper vessels.
Dry bulk: Minerals or grains stored in loose piles moving without mark or count.
Examples are potash, industrial sands, wheat, soybeans and peanuts.
Dunnage: Wood or other material used in stowing ship cargo to prevent its movement.
Duty: A government tax on imported merchandise.
E;
Electronic Data Interchange (EDI): The exchange of information through an electronic format. Electronic commerce has been under intensive development in the transportation industry to achieve a competitive advantage in international markets.
Elevator: A complex including storage facilities, computerized loading; inspection rooms and docks to load and unload dry bulk cargo such as grain or green coffee.
Export packers: Firms that securely pack export products into a container to crate to protect the cargo from damage during an ocean voyage.
F;
Feeder service: Ocean transport system involving use of centralized ports to assemble and disseminate cargo to and from ports within a geographic area. Commodities are transported between major ports, then transferred to feeder vessels for further transport to a number of additional ports.
Fender piles: The wooden or plastic pilings on the outer edge of the wharf function like the fenders on a car. They are there to absorb the shock of a ship as it docks at the wharf and to protect the structural pilings that actually support the wharf. Fender piles are also called sacrifice piles since they are designed to be discarded after they are broken.
Fleeting: The area at which barges, towboats and tugs are berthed until needed. The operation of building or dismantling barge tows.
Foreign Trade Zone (FTZ) - Known in some countries as a free zone, a foreign trade zone (FTZ) is a site within the USA (in or near a U.S. Customs port of entry) where foreign and domestic goods are held until they ready to be released into international commerce. If the final product is imported into the U.S., duties and taxes are not due until the goods are release into the U.S. market. Merchandise may enter a FTZ without a formal Customs entry or the payment of Customs duties or government excise taxes. In the zone, goods may be: stored; tested; sampled; repackaged or relabeled; cleaned; combined with other products; repaired or assembled, etc.
Freight: Merchandise hauled by transportation lines.
Freight forwarder: An individual or company that prepares the documentation and coordinates the movement and storage of export cargoes. See also Customs house broker.
G;
Gantry crane: Track-mounted, shoreside crane utilized in the loading and unloading of breakbulk cargo, containers and heavy lift cargo.
General cargo: Consists of both containerized and breakbulk goods, in contrast to bulk cargo. See: breakbulk, container, bulk, dry bulk). General cargo operations produce more jobs than bulk handling.
Grain elevator: Facility at which bulk grain is unloaded, weighed, cleaned, blended and exported.
Gross tonnage: The sum of container, breakbulk and bulk tonnage.
H;
Harbor: A port of haven where ships may anchor.
Heavy hauler: A truck equipped to transport unusually heavy cargoes (steel slabs, bulldozers, transformers, boats, heavy machinery, etc.)
Heavy lift: Very heavy cargoes that require specialized equipment to move the products to and from ship/truck/rail/barge and terminals. This "heavy lift" machinery may be installed aboard a ship designed just for such transport. Shore cranes, floating cranes and lift trucks may also adapted for such heavy lifts.
Home port: Port from which a cruise ship loads passengers and begins its itinerary, and to which it returns to disembark passengers upon conclusion of voyage. Sometimes referred to as "embarkation port" and "turn around port."
Hopper car: A freight car used for handling dry bulks, with an openable top and one or more openings on the bottom through which the cargo is dumped.
Hostler (or hustler): A tractor, usually unlicensed, for moving containers within a yard. An employees who drives a tractor for the purpose of moving cargo within a container yard.
I;
Interchange: Point of entry/exit for trucks delivering and picking up containerized cargo. Point where pickups and deposits of containers in storage area or yard are assigned.
I.L.A. - International Longshoremen’s Association, which operates on the East and Gulf Coasts. See labor unions and longshoremen.
I.L.W.U.- International Longshore and Warehouse Union, which operates on the West Coast. See labor unions and longshoremen.
Intermodal shipment: When more than one mode of transportation is used to ship cargo from origin to destination, it is called intermodal transportation. For example, boxes of hot sauce from Louisiana are stuffed into metal boxes called containers at the factory. That container is put onto a truck chassis (or a railroad flat car) and moved to a port. There the container is lifted off the vehicle and lifted onto a ship. At the receiving port, the process is reversed. Intermodal transportation uses few laborers and speeds up the delivery time.
IMX: This is transportation shorthand for intermodal exchange. In an IMX yard, containers can be lifted from truck chassis to rail intermodal cars or vice versa.
ISO: International Organization for Standardization. Worldwide organization formed to promote development of standards to facilitate the international carriage and exchange of goods and services. Governs construction specifications for ISO containers.
J;
JIT: The abbreviation for "just in time," which is a way to minimize warehousing costs by having cargo shipped to arrive just in time for its use. This inventory control method depends on extremely reliable transportation.
L;
Labor union: An organization of workers formed to serve members’ collective interests with regard to wages and working conditions. The maritime unions within ports can include locals of the larger union, such as the General Longshore Workers; Clerks and Checkers; Sack-sewers, Sweepers, Water boys and Coopers; Dock Loaders and Unloaders of Freight Cars and Barges; Dray Clerks, Weighers and Samplers; plus the Seafarer’s International Union; the National Maritime Union; the Marine Engineers’ Beneficial Association and the Teamsters. Some laborers don’t belong to a union.
Landlord port: At a landlord port, the port authority builds the wharves, which it then rents or leases to a terminal operator (usually a stevedoring company). The operator invests in cargo-handling equipment (forklifts, cranes, etc), hires longshore laborers to operate such lift machinery and negotiates contracts with ocean carriers (steamship services) to handle the unloading and loading of ship cargoes. (See also: operating port.)
LASH: These 900-foot-long ships carry small barges inside the vessel. LASH stands for Lighter Aboard Ship. Just as cargo is transported by barge from the shallower parts of the Mississippi River to the Port of New Orleans for export aboard ocean-going ships, LASH barges are lifted into these unusual ships. Overseas, the ship can discharge clusters of barges in the open waters. Then several towboats will assemble the barges into tows bound for various ports and inland waterways, without the ship having to spend time traveling to each port.
Launch service: Companies that offer "water-taxi" service to ships at anchor.
LCL: The acronym for "less than container load." It refers to a partial container load that is usually consolidated with other goods to fill a container.
Length Overall (LOA): Linear measurement of a vessel from bow to stern.
Lift On-Lift Off (LO/LO): Cargo handling technique involving transfer of commodities to and from the ship using shoreside cranes or ship's gear.
LTL: Means a shipment that is "less than truckload". Cargoes from different sources are usually consolidated to save costs.
Long ton: A long ton equals 2240 pounds.
Longshoremen: Dock workers who load and unload ships, or perform administrative tasks associated with the loading or unloading of cargo. They may or may not be members of labor unions. Longshore gangs are hired by stevedoring firms to work the ships. Longshoremen are also called stevedores.
M;
Manifest: The ship captain’s list of individual goods that make up the ship’s cargo.
Marine surveyor: Person who inspects a ship hull or its cargo for damage or quality.
Master: The officer in charge of the ship. "Captain" is a courtesy title often given to a master.
Maritime: (adjective) Located on or near the sea. Commerce or navigation by sea. The maritime industry includes people working for transportation (ship, rail, truck and towboat/barge) companies, freight forwarders and customs brokers; stevedoring companies; labor unions; chandlers; warehouses; ship building and repair firms; importers/exporters; pilot associations, etc.
Marshaling yard: This is a container parking lot, or any open area where containers are stored in a precise order according to the ship loading plan. Containers terminals may use a grounded or wheeled layout. If the cargo box is placed directly on the ground, it is called a grounded operation. If the box is on a chassis/trailer, it is a wheeled operation.
Mean low water (MLW): Lowest average level water reaches on an outgoing tide.
Mean high water (MHW): Highest average level water reaches on an outgoing tide.
Mooring dolphin: A cluster of pilings to which a boat or barge ties up.
Motor ship (MS) or motor vessel (MV): A ship propelled by internal-combustion engines.
N;
NVOCC: A non-vessel-owning common carrier that buys space aboard a ship to get a lower volume rate. An NVOCC then sells that space to various small shippers, consolidates their freight, issues bills of lading and books space aboard a ship.
Neo-bulk cargo: Uniformly packaged goods, such as wood pulp bales, which stow as solidly as bulk, but are handled as general cargoes.
O;
Ocean carrier: Diesel-fueled vessels have replaced the old steamships of the past, although many people still refer to modern diesel ships as steamships. Likewise, the person who represents the ship in port is still often called a steamship agent. (See: steamship agent)
On-dock rail: Direct shipside rail service. Includes the ability to load and unload containers/breakbulk directly from rail car to vessel.
On-terminal rail: Rail service and trackage provided by a railroad within a designated terminal area.
Operating port: At an operational port like Charleston, South Carolina, the port authority builds the wharves, owns the cranes and cargo-handling equipment and hires the labor to move cargo in the sheds and yards. A stevedore hires longshore labor to lift cargo between the ship and the dock, where the port’s laborers pick it up and bring it to the storage site. (See landlord port.)
P;
Pallet: A short wooden, metal or plastic platform on which package cargo is placed, then handled by a forklift truck.
Pier: A structure which just out into a waterway from the shore, for mooring vessels and cargo handling. Sometimes called a finger pier.
Piggyback: A rail transport mode where a loaded truck trailer is shipped on a rail flatcar.
Pilot: A licensed navigational guide with thorough knowledge of a particular section of a waterway whose occupation is to steep ships along a coast or into and out of a harbor. Local pilots board the ship to advise the captain and navigator of local navigation conditions (difficult currents; hidden wrecks, etc.).
Port: This term is used both for the harbor area where ships are docked and for the agency (port authority), which administers use of public wharves and port properties.
Port-of-call: Port at which cruise ship makes a stop along its itinerary. Calls may range from five to 24 hours. Sometimes referred to as "transit port" and "destination port." (See also: home port)
Project cargo: The materials and equipment to assemble a special project overseas, such as a factory or highway.
Q;
Quay: A wharf, which parallels the waterline.
R;
Railhead: End of the railroad line or point in the area of operations at which cargo is loaded and unloaded.
Railyard: A rail terminal at which occur traditional railroad activities for sorting and redistribution of railcars and cargo.
Reefer: A container with refrigeration for transporting frozen foods (meat, ice cream, fruit, etc.)
Refrigeration or reefer units: The protective cooling of perishable freight by ice, liquid nitrogen, or mechanical devices
Ro/Ro: Short for roll on/roll/off . A ro/ro ship is designed with ramps that can be lowered to the dock so cars, buses, trucks or other vehicles can drive into the belly of the ship, rather than be lifted aboard. A ro/ro ship, like a container ship, has a quick turnaround time of about 12 hours.
Rubber-Tired Gantry (RTG): Traveling crane used for the movement and positioning of containers in a container field. RTG's may also be used for loading and unloading containers from rail cars.
S;
Sheddage: Regardless of the length of stay, a vessel is charged a one-time fee for use of shed space and/or marginal (waterside) rail track space. The charge is based on the length of a vessel.
Short ton: A short ton equals 2,000. Lifting capacity and cargo measurements are designated in short tons.
Spreader: a device for lifting containers by their corner posts. The spreader bar on a container crane is telescopic to allow lifting various length containers.
Steamship: Today, ships that transport cargo overseas are powered by diesel fuel instead of steam. Many people still use the term "steamship," but the more modern term for the service is "ocean carrier" and for the ship itself, "motor vessel."
Steamship agent: The local representative who acts as a liaison among ship owners, local port authorities, terminals and supply/service companies. An agent handles all details for getting the ship into port; having it unloaded and loaded; inspected and out to sea quickly. An agent arranges for pilots; tug services; stevedores; inspections, etc., as well as, seeing that a ship is supplied with food, water, mail, medical services, etc. A steamship agency does not own the ship.
Steamship company: A business that owns ships that operate in international trade .
Steamship line: A steamship (ocean carrier) service running on a particular international route. Examples: NSCSA (National Shipping Company of Saudi Arabia), American President Lines (APL), Maersk Sealand, Evergreen, etc.
Stevedores: Labor management companies that provide equipment and hire workers to transfer cargo between ships and docks. Stevedore companies may also serve as terminal operators. The laborers hired by the stevedoring firms are called stevedores or longshoremen.
Straddle carrier: Container terminal equipment, which is motorized and runs on rubber tires. It can straddle a single row of containers and is primarily used to move containers around the terminal, but also to transport containers to and from the transtainer and load/unload containers from truck chassis.
Stripping: The process of removing cargo from a container.
Stuffing: The process of packing a container with loose cargo prior to inland or ocean shipment.
T;
Tank barges: Used for transporting bulk liquids, such as petroleum, chemicals, molasses, vegetable oils and liquefied gases.
Tariff: Schedule, system of duties imposed by a government on the import/export of goods; also, the charges, rates and rules of a transportation company as listed in published industry tables.
Terminal: The place where cargo is handled is called a terminal (or a wharf).
Terminal operator: The company that operates cargo handling activities on a wharf . A terminal operator oversees unloading cargo from ship to dock, checking the quantity of cargoes versus the ship’s manifest (list of goods), transferring of the cargo into the shed, checking documents authorizing a trucker to pick up cargo, overseeing the loading/unloading of railroad cars, etc.
Toplift: A piece of equipment similar to a forklift that lifts from above rather than below. Used to handle containers in the storage yard to and from storage stacks, trucks and railcars.
Towboat: A snub-nosed boat with push knees used for pushing barges. A small towboat (called a push boat) may push one or two barges around the harbor. A large towboat is used to push from 5 to 40 barges in a tow is called a line boat. From the Port of New Orleans, line boats deliver cargo to Mid-America via the 14,500-mile waterway system flowing through the Crescent City.
(See also tug boat)
Tractor-trailer: Some trucks are a solid unit, such as a van, but many have three main units. The front section where the driver sits is called the cab or the tractor (because it pulls a load). Cargo is loaded into the metal box (container), which is loaded onto the wheel base called a chassis or a trailer. These big trucks are often also called 18-wheelers.
Trailer On Flat Car (TOFC): A container placed on a chassis that is in turn placed on a railroad car.
Tramp: A ship operating with no fixed route or published schedule.
Transit port: When the majority of cargoes moving through a port aren’t coming from or destined for the local market, the port is called a transit (or through) port.
Transit shed: The shed on a wharf is designed to protect cargoes from weather damage and is used only for short-term storage. Warehouses operated by private firms house goods for longer periods.
Trans-shipment: The unloading of cargo at a port or point where it is then reloaded, sometimes into another mode of transportation, for transfer to a final destination.
Transtainer: A type of crane used in the handling of containers, which is motorized, mounted on rubber tires and can straddle at least four railway tracks, some up to six, with a lifting capacity of 35 tons for loading and unloading containers to and from railway cards.
Trucks: Heavy automotive vehicles used to transport cargo. In the maritime industry, cargo is often carried by tractor-trailers. The tractor is the front part of the vehicle, also called a cab. The trailer is the detachable wheeled chassis behind the tractor, on which containers or other cargoes are placed. (See: common carrier; heavy hauler; drayage)
Tugboat: Strong v-hull shaped boat used for maneuvering ships into and out of port and to carry supplies. A ship is too powerful to pull up to the wharf on its own. It cuts power and lets the tug nudge it in. Generally barges are pushed by towboats, not tugs.
Twenty Foot Equivalent Unit (TEU): A unit of measurement equal to the space occupied by a standard twenty foot container. Used in stating the capacity of container vessel or storage area. One 40 ft. Container is equal to two TEU's.
U;
U. S. Army Corps of Engineers: See Corps of Engineers.
U. S. Customs: See Customs.
V;
Vessel: A ship or large boat.
Vessel operator: A firm that charters vessels for its service requirements, which are handled by their own offices or appointed agents at ports of call. Vessel operators also handle the operation of vessels on behalf of owners.
W;
Warehouse: A place in which goods or merchandise is stored.
Way bill: The document used to identify the shipper and consignee, present the routing, describe the goods, present the applicable rate, show the weight of the shipment, and make other useful information notations.
Wharf: The place at which ships tie up to unload and load cargo. The wharf typically has front and rear loading docks (aprons), a transit shed, open (unshedded) storage areas, truck bays, and rail tracks.
Wharfage fee: A charge assessed by a pier or wharf owner for handling incoming or outgoing cargo.
Y;
Yard: a system of tracks within a certain area used for making up trains, storing cars, placing cars to be loaded or unloaded, etc.
Ship Loading Terms:
ATDN: Any time Day or Night.
ATDN-SHINC: Stands for “Any Time, Day or Night, Sundays and Holidays Included” referring to when a vessel will operate.
FHINC: Fridays/Holidays Included
FXEX: We can also see FXEX (Friday Holiday Excluded) and,
FHINC: (Friday Holiday Included) in the case of Islamic countries as they observe Friday as holidays.
SHEX: A term meaning that Sundays and holidays are excluded in calculating the lay-time for vessel chartering.
SHINC: Sundays and Holidays Included” referring to when a vessel will operate.
WWD: Weather Working Day
ATDN: Any time Day or Night.
ATDN-SHINC: Stands for “Any Time, Day or Night, Sundays and Holidays Included” referring to when a vessel will operate.
FHINC: Fridays/Holidays Included
FXEX: We can also see FXEX (Friday Holiday Excluded) and,
FHINC: (Friday Holiday Included) in the case of Islamic countries as they observe Friday as holidays.
SHEX: A term meaning that Sundays and holidays are excluded in calculating the lay-time for vessel chartering.
SHINC: Sundays and Holidays Included” referring to when a vessel will operate.
WWD: Weather Working Day
CHARTERING TERMS ABBREVIATIONS:
A:
- AA = Always Afloat
- AAAA = Always Accessible Always Afloat
- AARA = Amsterdam-Antwerp-Rotterdam Area
- ABT = About
- ADCOM = Address Commission
- AFSPS = Arrival First Sea Pilot Station (Norway)
- AFFREIGHTMENT = The hiring of a ship in whole or part
- AFT = At or towards the stern or rear of a ship
- AGW = All Going Well
- AHL = Australian Hold Ladders
- ANTHAM = Antwerp-Hamburg Range
- APS = Arrival Pilot Station
- ARAG = Amsterdam-Rotterdam--Antwerp-Ghent Range
- A/S = Alongside
- ATDNSHINC = Any Time Day or Night Sundays and Holidays Included.
- ATUTC = Actual Times Used to Count
- BAF = Bunker Adjustment Factor.
- BALLAST = Heavy weight, often sea water, necessary for the stability and safety of a ship which is not carrying cargo.
- BAREBOAT CHTR = Bareboat Charter Owners lease a specific ship and control its technical management and commercial operations only
- BBB = Before Breaking Bulk
- BDI = Both Dates Inclusive
- BENDS = Both Ends (Load & Discharge Ports)
- BI = Both Inclusive
- BIMCO = The Baltic and International Maritime Council
- BL (1) = Bale
- BL (2) = (Bill of Lading) A document signed by the carrier which acts as a receipt and evidence of title to the cargo.
- BM = Beam
- BEAM = The maximum breadth of a ship
- BOB = Bunker on Board
- BOFFER = Best Offer
- BROB = Bunkers Remaining on Board
- BSS = Basis
- BSS 1/1 = Basis 1 Port to 1 Port
- BT = Berth Terms
- BUNDLING = the assembly of pieces of cargo, secured into one manageable unit.
- BUNKERS = Name given for vessels Fuel and Diesel Oil supplies
- BWAD = Brackish Water Arrival Draft
- CBM = Cubic Meter
- CBFT (or CFT) = Cubic Feet
- CFR (or C&F) = Cost and Freight
- CHOPT = Charterers Option
- CHTRS = Charterers
- CIF = Cost, Insurance & Freight. Seller pays all these costs to a nominated port or place of discharge.
- COA = Contract of Affreightment Owners agree to accept a cost per revenue ton for cargo carried on a specific number of voyages.
- COACP = Contract of Affreightment Charter Party
- COB = Close of Business
- COD = Cash On Delivery
- COGSA = Carriage of Goods by Sea Act
- CONS = Consumption
- COP = Custom Of Port
- CP (or C/P) = Charter Party
- CPD = Charterers Pay Dues
- CPT = Carriage Paid To
- CQD = Customary Quick Dispatch
- CROB = Cargo Remaining on Board
- CRN = Crane
- CST = Centistoke
- CTR = Container Fitted
- DAPS = Days all Purposes (Total days for loading & discharging)
- DDU = Delivered Duty unpaid.
- DDP = Delivered Duty Paid.
- DEM = Demurrage
- DESP = Dispatch
- DET = Detention
- DHDATSBE = Dispatch Half Demurrage on Actual Time Saved
- DISCH = Discharge
- DK = Deck
- DLOSP = Dropping Last Outwards Sea Pilot (Norway)
- DO = Diesel Oil
- DOLSP = Dropping Off Last Sea Pilot (Norway)
- DOP = Dropping Outward Pilot
- DOT = Department of Transport
- DNRSAOCLONL = Discountless and Non-Returnable Ship and/or Cargo Lost or Not Lost
- DRAFT = Depth to which a ship is immersed in water.
- DRK = Derrick
- DUNNAGE = Materials placed among the cargo for separation, and hence protection from damage, for ventilation and, in the case of certain cargoes, to provide space in which the forks of a lift truck may be inserted.
- DWAT (or DWT) = Deadweight. Weight of cargo, stores and water, i.e. the difference between lightship and loaded displacement.
- EC = East Coast
- EIU = Even if Used
- ELVENT = Electric Ventilation
- ETA = Estimated Time of Arrival
- ETC = Estimated Time of Completion
- ETD = Estimated Time of Departure
- ETS = Estimated Time of Sailing
- EXW = Ex Works
- FAS = Free Alongside Ship. Seller delivers goods to appropriate dock or terminal at port of embarkation and buyer covers costs and risks of loading.
- FD = Free of Dispatch
- FDD = Freight Demurrage Deadfreight
- FDIS = Free Discharge
- FEU = Forty foot container equivalency unit Standard 40' Container
- FHEX = Fridays/Holidays Excluded
- FHINC = Fridays/Holidays Included
- FILO = Free In/Liner Out. Seafreight with which the shipper pays load costs and the = carrier pays for discharge costs.
- FIO = Free In/Out. Freight booked FIO includes the sea freight, but no loading/discharging costs, i.e.
- FIOS = Free In/Out Stowed. As per FIO, but includes stowage costs.
- FIOT = Free In/Out and Trimmed. As per FIOS but includes trimming the leveling of bulk cargoes
- FIOSLSD = Free In/Out Stowed, Lashed, Secured and Dunnaged.
- FIOST = Free In/Out and Trimmed. Charterer pays for cost of loading/discharging cargo, including stowage and trimming.
- FIT = Free In Trimmed
- FIW = Free In Wagon
- FIXING = Chartering a Vessel
- FLT = Full Liner Terms Shipowner pays to load and discharge the cargo
- FMC = Federal Maritime Commission US government agency
- FMS = Fathoms = 6 feet
- FO (IFO) = Fuel Oil/Intermediate FO
- FOB = Free on Board. Seller sees the goods "over the ship's rail" on to the ship which is arranged and paid for by the buyer
- FOFFER = Firm Offer
- FOG = For Our Guidance
- FOQ = Free On Quay
- FOR = Free On Rail
- FORCE MAJEURE = Clause limiting responsibilities of the charterers and receivers due to events beyond their control.
- FOT = Free On Truck
- FOW = First Open Water or Free On Wharf
- FREE OUT = Free of discharge costs to Owners
- FWAD = Fresh Water Arrival Draft
- FWDD = Fresh Water Departure Draft
- FYG = For Your Guidance
- FYI = For Your Information
- GA = General Average
- GLS = Gearless
- GNCN = Gencon a standard BIMCO charter party form
- GN (or GR) = Grain (capacity)
- GO = Gas Oil
- GRD = Geared
- GRT = Gross Registered Tonnage
- GSB = Good Safe Berth
- GSP = Good Safe Port
- GTEE = Guarantee
- 2H = Second Half
- HA = Hatch
- HDWTS = Half Dispatch Working Time Saved
- HMS = Heavy Metal Scrap
- HO = Hold
- HW = High Water
- IMDG = International Maritime Dangerous Goods Code
- IMO = International Maritime Organization
- IND = Indication
- INTERMODAL = Carriage of a commodity by different modes of transport
- ITF = International Transport Federation international body that regulates crewing of ships
- IU = If Used
- IUATUTC = If Used, Actual Time Used To Count
- IUHATUTC = If Used, Half Actual Time Used To Count
- IWL = Institute Warranty Limits
- LANE METER = method of measuring the space capacity of Ro/Ro ships whereby each unit of space is represented by an area of deck 1.0 meter in length x 2.0 meters in width.
- LASH = To hold goods in position by use of Ropes, Wires, Chains or Straps
- LAT = Latitude
- LOA = Length Overall of the vessel
- LOW = Last Open Water
- LS (or LUMPS) = Lumpsum
- LSD = Lashed Secured Dunnaged
- LT = Liner Terms
- LW = Low Water
- LYCN = Laycan (Layday Cancelling Date)
- MB = Merchant Broker
- MDO (DO) = Marine Diesel Oil
- MIN/MAX = Minimum/Maximum (cargo quantity)
- MOLCHOPT = More or Less Charterers Option
- MOLOO = More or Less Owners Option
- MT = Metric Ton (i.e. 1,000 kilos / 2204.6lbs)
- M/V = Motor Vessel
- NAABSA = Not Always Afloat But Safely Aground
- NCB = National Cargo Bureau
- NESTING = Implies that cargo is presented stacked in the contour of similarly shaped cargo, it may be likened to a stack of plates.
- NOR = Notice of Readiness
- NRT = Net Registered Tonnage
- NYPE = New York Produce Exchange
- OO = Owners Option
- OSH = Open Shelter Deck
- OWS = Owners
- PASTUS = Past Us
- PC = Period of Charter
- PCGO = Part Cargo
- PCT = Percent
- PDPR = Per Day Pro Rata
- PERDIEM = Per Diem = By the Day
- PHPD = Per Hatch Per Day
- PRATIQUE = License or permission to use a port
- RCVR = Receivers
- ROB = Remaining On Board
- RT = Revenue Ton (i.e. 1.0 metric Ton or 1.0 cubic meter, whichever is greater)
- SATPM = Saturday P.M.
- SB = Safe Berth
- SD (or SID) = Single Decker
- SEAFREIGHT = Costs charged for transporting goods over the sea. This does not cover any haulage or loading/discharging costs but the sea transport only.
- SELFD = Self Discharging
- SF = Stowage factor. Cubic space occupied by one ton (2,240 lbs/1,000 kgs) of cargo.
- SHINC = Sundays/Holidays Included
- SHEX = Sundays/Holidays Excluded
- SKIDS = Are bearers (timber or steel) positioned under cargo to enable fork lift handling at port, and for ease of rigging and lashing on board ship
- SL = Bale (capacity)
- SOC = Shipper Owned Container
- SOF = Statement Of Facts
- SP = Safe Port
- SRBL = Signing and Releasing Bill of Lading
- SSHEX (or SATSHEX) = Saturdays, Sundays, Holidays Excluded
- SSHINC = Saturdays, Sundays, Holidays Included
- (or SATSHINC)
- STABILITY = It is paramount that a vessel is stable in all respects at all times.
- STARBOARD = Right side of a ship when facing the bow
- STEM = Subject To Enough Merchandise (Availability of Cargo)
- STERN = The aft part of a ship
- SUB = Subject (to)
- SUPERCARGO = Person employed to supervise cargo handling operations. Often called a port captain.
- SWAD = Salt Water Arrival Draft
- SWDD = Salt Water Departure Draft
- TC = Time Charter Owners agree to hire a particular ship for a set length of time
- TEU = Twenty Foot Equivalency Unit Standard 20' Container
- TTL = Total
- TW = Tween Decker
- USC = Unless Sooner Commenced
- UU = Unless Used
- UUIUATUTC = Unless Used If Used Actual Time Used To Count
- VPD = Vessel Pays Dues
- WCCON = Whether Customs Cleared Or Not
- WIBON = Whether In Berth Or Not
- WIFPON = Whether In Free Pratique or not
- WIPON = Whether In Port Or Not
- WLTOHC (distance) Water Line-To-Hatch Coaming
- WOG = Without Guarantee
- WPD = Weather Permitting Day
- WWD = Weather Working Day
- WRIC = Wire Rods In Coils
- WWR = When, Where Ready
- WWWW = Wibon, Wccon, Wifpon, Wipon
- YAR = York Antwerp Rules
Glossary of International Shipping Terms:
A:
ACE: The Automated Commercial Environment is the online web portal used to report data to the Automated Export System (AES) for exports leaving the United States, and also for customs filing for imports entering the United States.
AES: The Automated Export System is the system used by the U.S. government to collect data on exports. This data is called Electronic Export Information (EEI) and in many cases exporters are legally required to file the EEI through AES for each shipment. The U.S. Census Bureau uses this data to calculate trade statistics such as gross domestic product (GDP), while U.S. Customs and Border Protection (CBP) uses it to make sure that exporters are following U.S. export regulations. See also, AES Filing Software by Shipping Solutions (Plus 20 Key Terms.
Aggregate shipment: Multiple shipments from different sellers to a single consignee that are consolidated by the carrier into a single shipment.
Air waybill (AWB): The AWB is a document that controls the routing of an exporter’s cargo while it is in the hands of the air carrier or a consolidator. It is a contract for carriage; however, it cannot be negotiated
ALADI: The Latin American Integration Association (ALADI) is an international association of Latin American countries. Its function in Latin America is comparable to the function of the former European Economic Community (which has now become embedded in the framework of the European Union) in Europe. The goal of ALADI is to harmonize trade across the member states. There are currently 13 member countries representing a total population of over 500 million people. ALADI has its own commodity classification system similar to the global Harmonized System (HS).
Alongside: Refers to the side of a ship. Goods delivered alongside are placed on the dock or barge within reach of the ship’s rigging so it can be easily loaded onto the ship. It’s used, for example, in the Incoterms 2010 trade term, Free Alongside Ship.
Apparent good order: When freight appears to be free of damage after being assessed it is said to be in apparent good order.
Arrival notice: Notification provided by the carrier when a shipment has arrived to the consignee or notify party.
Astern: Can either mean 1) behind a ship, or 2) to move a ship in reverse direction.
ATDNSHINC: Stands for “Any Time, Day or Night, Sundays and Holidays Included” referring to when a vessel will operate.
Athwartships: A direction across the width of a ship.
Audit trail: A system that stores and maintains records of business processes. With regards to exporting, companies are strongly encouraged to maintain an audit trail documenting their compliance screenings in order to be able to demonstrate due diligence in case of an audit. Having an audit trail can protect your company from fines or penalties in the case of an export compliance violation.
Automatic identification system (AIS): A satellite system used by ships and vessel tracking service (VTS) to identify and locate ships.
B:
Backhaul: Cargo carried on a return journey.
Balloon freight: Freight that is low weight but high volume (light but bulky.)
Beam: The width of a ship.
Beneficiary: The party that receives payment.
Bilateral: A bilateral agreement is one in which both parties agree to provide something for the other.
Bill of lading: A document issued by a carrier or their agent acknowledging receipt of cargo for shipment. Often abbreviated as BOL, BoL, B/L, or BL. If there were no issues with the cargo stated on the BOL, it is said to be a clean bill of lading. See also, 3 Things You Need to Know about the Bill of Lading Form.
Bill of sale: A document that confirms that transfer of goods in exchange for money.
Bill-to party: The party paying for goods or services in a transaction.
BIS: The Bureau of Industry and Security, an agency within the U.S. Department of Commerce tasked with enforcing the Export Administration Regulations (EAR).
Blocking or bracing: Wood or metal supports used to secure cargo while in transit. Also called dunnage.
Block stowage: Loading cargo close together to minimize movement of goods while in transit.
Bolster: A piece of equipment attached to a chassis or railcar in order to secure the container.
Bond port: The initial port of entry where a vessel transporting goods first arrives at a country.
Booking: Arrangements made with a carrier for the movement of cargo; space reservation.
Bow: The front of a vessel.
Broken stowage: Empty space in a container not occupied by cargo.
Bulk cargo: Cargo that is shipped loose as opposed to being shipped in packages or containers. Grain and coal are examples of goods usually shipped as bulk cargo.
Bull ring: A device attached to the floor of a container which is used to secure cargo.
C:
Cabotage: Transport of goods between two places in the same country by a transporter from another country.
Cargo: Any goods being transported, regardless of the mode of transport.
Cargo declaration: Information submitted prior to, upon arrival, or upon departure of an international shipment required by a country’s customs authority.
Cargo manifest: A document detailing the cargo carried on a ship, often provided to a customs authority.
Carnet: A document permitting the holder to temporarily send goods to certain foreign countries for display or demonstration purposes without having to pay duties. Check out, What is an ATA Carnet?
Cash on delivery (COD): The sale of goods in which payment is made upon delivery rather than in advance.
Carrier: A carrier is a party that transports goods for another person or company and is responsible for any possible loss of or damage to the goods during transport. A common carrier provides transportation services to the public in return for compensation. A contract carrier provides this service under special contracts, often for government clients.
CBP: Customs and Border Protection, part of the Department of Homeland Security, is the agency within the U.S. government tasked with controlling the flow of people and goods into and out of the country, and with enforcing import and export regulations.
CCC Mark: A label indicating cargo conforms to standards established by the Chinese government.
CCL: The Commerce Control List is a list of dual-use items (items that have both a commercial application as well as a potential military application) published as part of the U.S. Department of Commerce’s Export Administration Regulations (EAR). Each item on the CCL is identified with an Export Control Classification Number (ECCN). Knowing the right ECCN for your product plays a role in determining if you need an export license.
CE Mark: A label indicating cargo conforms to standards established by the European Union.
Certificate of free sale: This document indicates a particular product is marketed in the United States or is eligible for export, and that the particular manufacturer has no unresolved enforcement actions pending before or taken by the U.S. Food and Drug Administration (FDA). It is often used when exporting to countries whose regulatory agencies are not as well-developed as the United States’ FDA.
Certificate of inspection: A document certifying that merchandise is in good condition immediately prior to being shipped.
Certificate of origin: A document certifying where goods were originally made, often abbreviated as COO. A COO specific to a particular free trade agreement may be used to claim preferential duty treatment. A generic certificate of origin may be requested by the customs authority of the country of import, in which case the COO must be stamped by a chamber of commerce.
CFR: The Code of Federal Regulations is the codification of rules and regulations published in the U.S. Federal Register.
Chamber of commerce: An association of businesses that may serve several functions, including advocating or lobbying for their member companies, organizing business-related programming and events in their communities, and, perhaps most relevant for exporters, providing document certification services. See our article, The Chamber of Commerce and Export Documents: The Certificate of Origin.
Chassis: The base frame of a wheeled vehicle, used to secure a container prior to movement.
Chock: Material (often wood) placed next to cargo to prevent excessive movement of the cargo during transit in order to avoid damage.
CL: Abbreviation for carload or containerload.
Claim: In the context of logistics, a claim is a demand made by a customer to a transportation company for payment in order to compensate for loss or damage of goods.
CM and cm: CM (uppercase) stands for “cubic meters,” while cm (lowercase) stands for “centimeters.”
Commerce Country Chart: Part of the Export Administration Regulations (EAR) which helps exporters determine if they need to apply for an export license in order to ship a particular product to a particular country.
Commercial invoice: A fundamental document for an international transaction with details including what goods are being shipped, who is the shipper, and who is the ultimate consignee. Serves as the basis for all other documents related to the shipment.
Commodity: Any commercial good that is shipped.
Common law: Law that derives authority from precedent, custom and usage rather than from statutes, particularly regarding the laws of the United States, the United Kingdom, and countries formerly part of the British Empire.
Compliance: In the context of international shipping, being compliant or maintaining compliance means that the company in question is following all applicable laws and rules which govern their shipments. In this context the more specific terms regulatory compliance or trade compliance may be used to differentiate from other uses of the term, as the word compliance has other meanings in other contexts such as in the fields of medicine and psychology. A business practice that goes against specific laws is termed a compliance violation. See our article, What to Do When You Encounter Export Violations.
Concealed loss/concealed damage: Shortage of or damage to goods shipped that is not immediately evident upon delivery.
Connecting carrier: A carrier which acts as an intermediary between two or more other carriers.
Consignee: The person or place to whom a shipment will be transferred. The ultimate consignee is the final recipient of the goods, while an intermediate consignee takes possession of the goods for a portion of the time that they are in transit.
Consignment: A shipment of goods to a consignee.
Consignor: Refers to the exporter or shipper from which the goods originate.
Consolidation: When cargo from multiple shippers is combined in a single container.
Consul: A government official residing in a foreign country who represents the interests of their home country.
Consumption entry: When goods are imported into the United States without any time or use restrictions. The official U.S. Customs and Border Protection (CBP) website states that about 95% of all imports fall into this category.
Container: A truck trailer loaded with cargo that can be detached for loading onto a vessel or railcar. Different types of containers exist for different shipping needs. For example, a container may be ventilated, refrigerated, insulated, dehumidified, or equipped with special devices used to secure certain types of cargo. A container shipment is a large shipment, typically over 20,000 pounds.
Container load: A load large enough in volume or weight to fill a container.
Container manifest: A document stating the contents of a container, its point of origin and point of destination. Vessels may be required by law to produce a manifest for every container being transported.
Contraband: Prohibited cargo such as illegal drugs or unauthorized weapons.
Contract: A legally binding agreement between two or more parties.
C-TPAT: U.S. Customs and Border Protection established Customs-Trade Partnership Against Terrorism in November 2001 as a voluntary partnership to help ensure supply chain security. Meeting C-TPAT standards enables faster processing through customs inspections and formalities.
Cu.: Abbreviation for “cubic” used when describing measurements of volume.
Cube out: Refers to when a container or vessel has reached its volumetric capacity before reaching its weight capacity.
Customhouse: A government office where duties are paid and import and export paperwork are filed.
Customs: A customs authority, or customs for short, refers to the agency within a government that is responsible for collecting duties and enforcing import and export regulations.
Customs bonded warehouse: A warehouse authorized by customs to receive duty-free goods.
Customs broker: An individual or organization who helps a shipper navigate customs requirements.
Customs clearance: The process in which a customs authority assesses a shipment being imported in their country in order to ensure compliance with their country’s import regulations. A shipment that has been approved by the customs authority and allowed to enter the commerce of their country is said to have cleared customs.
Customs entry: Also called Entry Summary or Form 7501, is a document that provides US Customs and Border Protection (CBP) with details about a shipment being imported into the United States, such as value, classification, and origin. CBP uses the form to calculate duties owed.
Customs invoice: A document required by a country’s customs authority which serves the same purpose as a standard commercial invoice but also contains additional information such as a certificate of origin.
Customs of the port (COP): A phrase referring to local rules and practices which may impact a shipment.
Customs value only: Some shipments involve no actual monetary transaction between the exporter and the ultimate consignee, such as shipments for repair under warranty, or shipments of items used for display at trade shows. These shipments are still subject to duties and taxes, and exporters must list the monetary value of the items on the shipment on the customs invoice in order to enable the customs authority in the country of import to assess how much duty the importer must pay. In these cases, the exporter should include a customs value only statement on the invoice.
Cut-off time: The latest time cargo may be delivered to a terminal for loading.
D:
Dangerous goods: A product may be considered a dangerous good if it is corrosive, flammable, poisonous, toxic, explosive, etc. Shipping dangerous goods may require special documentation or packaging to ensure safety. See also, Hazardous Materials or Dangerous Goods?
Dangerous goods declaration: A dangerous goods declaration form is a document produced by an exporter providing details on the dangerous goods in their shipment. When shipping dangerous goods via air, a Dangerous Goods IATA Declaration form is required, and when shipping dangerous goods via sea, a Dangerous Goods IMO Declaration form is required.
Destination control statement: A legal statement put on an export export invoice that specifies that the goods are to be transferred to the ultimate consignee and no other party. Diversion to other countries or parties without prior authorization is a violation of U.S. law. Also called an anti-diversion clause.
DDTC: Directorate of Defence Trade Controls (DDTC) is the government agency within the U.S. Department of State tasked with enforcing the International Traffic in Arms Regulations (ITAR), which regulate the export of space- and defence-related products.
D&H: Abbreviation for “dangerous and hazardous” cargo.
DBA: Stands for “doing business as,” used to specify that a company is doing business under a certain registered name.
Deconsolidation point: Location where cargo is separated in preparation for delivery.
Deemed export: Transmission of controlled technology, source code, or information to a foreign national at home or abroad. Export regulations apply to deemed exports as well. See, Deemed Exports: Exporting Without Shipping a Product.
Delivery receipt: A document signed and dated by a consignee or their authorized agent confirming receipt of goods and stating the condition of the goods upon delivery.
Demurrage/detention: Demurrage is a charge to be paid by a shipper or consignee to the carrier as penalty for delaying the carrier’s cargo beyond the allowed free time. Detention is the same as demurrage except that instead of applying to delays in cargo, detention applies to delays in equipment.
Denied party screening: Also called restricted party screening or trade party screening, denied party screening is the process of screening potential customers, partners or vendors against denied party lists. These are lists of individuals or organizations that a government has identified as parties that one can’t do business with and that one may be penalized for doing business with. See also, Export Compliance: Understanding Restricted Party Screening.
Destination control statement: A legal statement put on a shipping document which specifies that the goods are to be transferred to the ultimate consignee and no other party. Diversion to other countries or parties without prior authorization is a violation of U.S. law. See also, What Is the Destination Control Statement and Why Should It Be on Your Commercial Invoice?
Discrepancy: When documents presented do not conform to the requirements of the letter of credit. Banks will not accept letters of credit which have discrepancies.
Diversion: Diversion refers either to 1) a change made to the route of a shipment or to the route of the entire vessel or 2) the transfer of goods from the intended end-user to some other party.
Dock: For road transportation, a platform from which trucks are loaded and unloaded. For sea transportation, a cargo handling area adjacent to the shoreline where a ship ties up.
Dock receipt: A document used to acknowledge receipt of cargo. Provides the framework for the preparation of an ocean bill of lading.
DOT: U.S. Department of Transportation. A U.S. agency within the executive branch which oversees transportation in the U.S.
Drawback: A partial refund of an import fee, usually given if goods are re-exported from the country which collected the fee.
Drayage: Transport of goods over a short distance. Some definitions specify that drayage is the transport of goods in which both the trip origin and destination are within the same urban area. Also called cartage.
Dumping: Importing goods into a country at a price less than the fair market value.
Dutiable value: The amount on which a customs duty is calculated.
Duties: Taxes collected on importing and exporting goods. Also called tariffs.
E:
EAR: The Export Administration Regulations are published by the U.S. Department of Commerce and regulate exports of dual-use items, meaning items that have both a commercial use as well as a potential military application.
ECCN: Export Control Classification Numbers are alphanumeric codes used to identify dual-use items, meaning items that have both a commercial use as well as a potential military application. Knowing the right ECCN for your product plays a role in determining if you need an export license.
EEI: Electronic export information is the data that exporters must report to the Automated Export System (AES) via the Automated Commercial Environment (ACE) online web portal. See also, Who is Responsible for Filing the Electronic Export Information (EEI)?
Electronic data interchange (EDI): The electronic transmission of business documents such as invoices, purchase orders, and bills of lading.
Embargoes: Sanctions are prohibitions designed to protect economic or national security and may include trade barriers, tariffs, and restrictions on financial transactions. Embargoes are similar but usually refer to more severe restrictions such as travel bans or blockades.
Eminent domain: The power of a sovereign government to take property for a necessary public use.
Empty repo: Stands for empty repositioning; refers to the movement of empty containers.
End-user: The ultimate recipient of a shipment. Generally synonymous with ultimate consignee. This may be different from the party being billed for the shipment.
Endorsement: A legal signature that signals transfer of rights from one party to another.
Equipment interchange receipt (EIR): A document used when transferring a container from one carrier to another, or from one terminal to another.
ERP: Enterprise resource planning (ERP) software helps companies with order-processing and accounting. Some ERP systems include international shipping or trade compliance modules, but these are often limited in their functionality. See our article, 6 Reasons Exporters are Frustrated with Their ERP’s Export Module.
ETA, ETC, ETD, ETR, ETS: Estimated time of arrival, completion, departure, readiness, or sailing.
Exception: A delivery in which the driver or recipient notes a problem on the delivery receipt before signing it is referred to as an exception. An exception is usually related to shortage or damage of goods.
Exclusive use: A shipper may pay a premium rate in order to obtain exclusive use of a trailer. This means that the container will only be filled with the shipper’s goods and not those of any other party, even if there is additional space on the trailer.
Export: Shipment of goods out of a country. Opposite of import.
Export compliance program: Often abbreviated ECP, an export compliance program is a company's written set of procedures for ensuring compliance when exporting. See our article, Your Company Needs an Export Compliance Program.
Export controls/import controls: Refers to licenses, permits, and other authorizations which may be required from a government in order to legally export or import something.
Export documentation software: A software tool used by a company to ensure consistency, efficiency and auditability in their export documentation and compliance process, such as Shipping Solutions.
Export license: A government-issued permit that authorizes a shipper to export a certain good or to export to a certain country or party. Download the free white paper, How to Determine if You Need an Export License.
Export management company: Exporting companies without their own export department sometimes outsource their export operations to an export management company (EMC).
F:
FAK: Abbreviation for “freight all kinds.” Typically refers to a full container loaded with mixed cargo.
False billing: Misrepresenting freight information on shipping documents.
Federal Maritime Commission (FMC): The agency within the U.S. federal government tasked with enforcing laws related to transport of goods by sea.
Federal Register: The Federal Register, sometimes abbreviated as Fed. Reg., FedReg, or FR, is the official journal of the U.S. government where new rules and regulations are published.
Force majeure: A common clause included in contracts which exempts parties for not fulfilling their obligations due to events beyond their control, such as natural disasters or war.
Fore and aft: The direction on a ship parallel to the center line.
Foreign trade zone: Areas in which commodities can be manufactured, modified or stored under specific customs regulations and generally not subject to customs duties. May be abbreviated FTZ and sometimes called a free trade zone or free port. See our article, Foreign Trade Zones: Advantages for Importers and Exporters.
FPPI: Foreign principal party of interest is the party to whom final delivery of the goods will be made; typically the foreign buyer.
Free time: The amount of time that a carrier’s equipment may be used without incurring additional charges.
Freight: Any product(s) being transported.
Freight broker: A person who arranges transportation on behalf of a shipper. Typically a freight broker will connect small shippers to carriers who can move their goods.
Freight forwarder: A company that arranges the transportation of goods on behalf of a shipper. A freight forwarder may have its own in-house carriers or may contract with external carriers. Freight forwarders often specialize in consolidating LTL freight from multiple shippers.
FTA: Free trade agreements are made between countries in an effort to reduce barriers to trade between the participating countries.
FTR: The Foreign Trade Regulations (FTR) are a set of regulations placed on international trade in the U.S. They are established and updated by the U.S. Census Bureau. It is in the FTR that the requirement to file the Electronic Export Information (EEI) through the Automated Export System (AES) can be found. See also, Why Is the Census Bureau Monitoring Your Exports?
Full truckload (FTL): A full truckload carrier is a carrier that contracts the entirety of a truck’s carrying capacity to a single customer. Often referred to as simply a truckload carrier.
G:
General order: When U.S. Customs orders shipments without entries to be kept in their custody.
Gross vehicle weight (GVW): The total weight of a vehicle including the weight of the vehicle itself and any attached containers.
H:
Harbour: A place at which ships stop to resupply and load or unload cargo.
Harbour master: An official responsible for overseeing the operations of a harbour.
Hatch: The opening on the deck of a ship which gives access to the cargo hold.
Hazardous materials (HazMat): May be used interchangeably with the term “dangerous goods,” hazardous materials (or HazMat for short) are goods which may pose a threat to safety because they are poisonous, toxic, corrosive, explosive, flammable, etc. More precisely, hazardous materials are defined by the U.S. Department of Transportation in accordance with the Federal Hazardous Material Law. It is more common to see the term “hazardous materials” used when shipping domestically within the U.S., whereas the term “dangerous goods” is used more often when shipping internationally. Shipping hazardous materials may require special documentation or packaging to ensure safety.
HMF: Harbour maintenance fee. See our article, A Case of HaruMpF and MumPF.
HS: The Harmonized System is an internationally accepted system used to classify products. The first six digits of an HS code are universal across all countries, but each country will add additional digits to further specify products.
HS codes play a role in determining import and export controls as well as duty rates.
The code for a particular product is often called its tariff classification, as is the process for finding the right code.
I:
IMDG: International Maritime Dangerous Goods code; the regulations established by the International Maritime Organization (IMO) for the international transport of dangerous goods.
Import: Shipment of goods into a country. Opposite of export.
Import declaration: Information submitted by an importer or their agent to their country’s customs authority before or upon importation of goods, such as the contact details of the importer, how the goods are being transported, and the tariff classifications and values of the items on the shipment.
Import license: A government-issued permit authorizing a party to import a good into the country.
In bond: An import or export shipment that has not yet cleared customs is referred to as in bond.
INCOTERMS: Incoterms are universal trade terms published by the International Chamber of Commerce (ICC.) They consist of three-letter codes that are intended to clearly communicate the tasks, costs and risks associated with the transportation and delivery of goods in an international transaction. They describe how responsibility is allocated between the seller and the buyer for different parts of the transaction. Download the free Incoterms 2020 Chart of Responsibilities and Transfer of Risk.
Interchange point: A location where freight is transferred from one carrier to another.
Intermodal: Intermodal transportation is the movement of goods via more than one type of transportation (e.g. air, rail, sea, truck, etc.) An intermodal container is one that can be used in different modes of transport without having to unload the goods and reload them at each point at which the mode of transport changes. In the context of international trade, intermodal container is usually synonymous with container.
Inward foreign manifest (IFM): A document listing all cargo entering a country. Required by all world ports and is the primary source from which import duties are assigned.
ITAR: The International Traffic in Arms Regulations regulate the export of space- or defence-related products and are enforced by the U.S. Department of State. See also, An Overview of the International Traffic in Arms Regulations (ITAR).
J:
JIT: Abbreviation for just in time. A method of inventory control which minimizes warehousing and in which the container itself acts as a movable warehouse and arriving on schedule is crucial.
L:
Laden: Loaded aboard a vessel.
Landed cost: The total cost of goods for a buyer including transportation costs and import duties.
Less-than-truckload, less-than-load (LTL): A medium shipment, typically between 150 pounds and 20,000 pounds. An LTL carrier mixes freight from several customers in a single truckload. May also be called less-than-container (LCL).
Letter of credit: Also called a documentary collection and often abbreviated as LC or L/C, a letter of credit is a written commitment by a bank issued after a request by an importer that payment will be made to an exporter provided that the terms of the letter of credit have been met as evidenced by the presentation of certain documents. See also, What's a Letter of Credit? (Infographic).
License exception: Certain criteria may be met that allow an exporter to export a product without an export license in cases where an export license would normally be required. These criteria are called license exceptions. See also, What You Need to Know about Export License Exceptions.
Liquidated damages: The penalty a seller must pay the buyer if a project does not meet the standards or deadline outlined in the sales contract.
List: The amount that a vessel tilts from the vertical, measured in degrees.
Logistics: The management of the flow of products as they are transported from the point of origin to their final destination. A logistics company is a general term for a company that provides logistics services, which may include freight forwarding, customs brokerage, and/or consulting services.
Longshoreman: A port employee tasked with loading and unloading ships.
M:
Malpractice: In the context of shipping, malpractice refers to situations in which a carrier illegally gives preference to a customer in order to attract their business.
Maritime: Relating to transport by sea.
Marking: Letters, numbers, or other symbols placed on packaging used for identification purposes.
Master bill of lading: A bill of lading issued by a carrier to a freight forwarder acknowledging receipt of container for shipment. This is different from a house bill of lading which is issued by a freight forwarder to a shipper, acknowledging receipt of their items for shipment.
MPF: Merchandise processing fee. See our article, A Case of HaruMpF and MumPF.
Multimodal: See Intermodal.
N:
NAFTA: The North American Free Trade Agreement was established in 1994 in order to harmonize trade between the United States, Canada and Mexico. Companies located in these countries may be eligible for reduced duty rates when importing if their goods qualify under the terms of NAFTA. NAFTA was replaced on July 1, 2020, by the United States-Mexico-Canada Agreement (USMCA).
NCBFAA: The National Customs Brokers and Forwarders Association of America is an organization representing the interests of customs brokers and freight forwarders in the U.S. They publish guidelines on best practices, including specific guidelines on how to create a shipper’s letter of instruction (SLI) when authorizing freight forwarders to file through the Automated Export System (AES) on behalf of the exporter.
NEC, NES: Not elsewhere classified, not elsewhere specified.
Negotiable/non-negotiable: A negotiable instrument is a document that can be transferred from its original holder to a third party. A non-negotiable document cannot be transferred to another party. An inland or ocean bill of lading may be either negotiable or non-negotiable; a bill of lading consigned “to order” or “to order of shipper” is negotiable once it is endorsed on the back by the shipper or their representative. Air waybills are always non-negotiable. See our article, The Bill of Lading Always Proves Shipment Ownership.
Net weight: The weight of goods not including the weight of their packaging.
Non-dumping certificate: Required by some countries to ensure protection against dumping of certain products.
NVOCC: A non-vessel operating common carrier behaves like a carrier except it doesn’t provide the actual transportation service itself. Instead, an NVOCC buys space from carriers and sells this space to shippers.
O:
On board: A notation on a bill of lading indicating that cargo has been loaded on a ship.
On deck: A notation on a bill of lading indicating that cargo has been stowed on the open deck of a ship.
Open account: A transaction in which goods are shipped to a foreign buyer without guarantee of payment.
Operating ratio: A measure of operating efficiency based on a comparison between a carrier’s operating expenses and its net sales.
Origin: Can mean 1) Location where a shipment starts its journey; or 2) Country where goods were originally manufactured.
Overage: When the number of units received is greater than the quantity stated on the export documents. Opposite of shortage.
P:
Packing list: A standard document which accompanies a shipment. Also called a packing slip, this document lists the products on a shipment along with packaging information but does not include prices. See also, The Importance of an Export Packing List for Your International Shipments.
Pallet: A platform on which packages may be loaded. Facilitates easier handling by a lift truck.
Parcel/package/small parcel/small package: A small shipment, typically below 150 pounds.
Payee: The party paid in a transaction; the seller.
Payer: The party paying money in a transaction; the buyer.
Payment terms: Terms that describe how money will be paid in a transaction. Typically, the shipper is responsible for payment for prepaid shipments, while the consignee is responsible for payment for collect shipments, unless a third party is indicated as the payor on the shipping documents.
Phytosanitary inspection certificate: A document issued by the U.S. Department of Agriculture which certifies that a shipment has been inspected and is free from harmful pests and plant diseases. Used to meet import requirements of other countries.
Pier: A structure perpendicular to the shoreline to which a ship is secured in order to load or unload cargo.
Place of delivery: Location where cargo leaves the custody of a carrier.
Place of receipt: Location where cargo enters the custody of a carrier.
POD: Abbreviation for 1) port of discharge; 2) port of destination; or 3) proof of delivery, a document provided by the carrier required to receive payment.
Point of origin: The location where a shipment is transferred from a shipper to a carrier.
POL: Abbreviation for 1) port of loading; or 2) petroleum, oil and lubricants.
Port: May refer to 1) A harbour with piers or docks; 2) The left side of a ship (when facing forward; opposite of starboard); or 3) An opening in the side of a ship used for handling freight.
Port of call: Port where a ship discharges or receives traffic.
Port of entry: Port where cargo is unloaded and enters a country.
Port of exit: Port where cargo is loaded and leaves a country.
PPI: Principal party of interest. See FPPI and USPPI.
Prepaid: Freight charges paid by a shipper prior to release of bills of lading by the carrier.
Proforma invoice: A document that acts as a formal quote, produced by the seller and given to the potential buyer before a transaction is finalized. See also, How Does the Proforma Invoice Fit in the Sales Process?
Q:
Quarantine: A restriction placed on an operation in order to protect public health and safety.
Quota: The quantity of goods that may be imported without restrictions over a set period of time.
Quotation: Usually called a quote for short, an offer to sell goods at a stated price under stated conditions.
R:
Rate basis: The formula of specific factors that play a role in determining freight rates.
RFP, RFQ: Request for proposal, request for quotation.
Reasonableness: Under ICC and common law, the requirement that a freight rate not be higher than what is necessary to reimburse the carrier and allow a fair profit.
Relay: The transfer of containers from one ship to another when both ships are controlled by the same carrier.
Remittance: Funds sent by one person to another as payment.
Revenue: Payment received by a carrier for transporting goods.
Roll-on/roll-off: Also called RORO or ro-ro for short, these are vessels designed to carry wheeled cargo, such as vehicles and trailers. This is in contrast to lift-on/lift off (LoLo) vessels which use a crane to load and unload cargo.
S:
Sanction: An embargo enforced by a government against another country.
SCAC: Standard Carrier Alpha Codes are codes developed by the National Motor Freight Traffic Association which are used to identify inland carriers in the U.S.
Schedule B: Schedule B codes are used specifically for exporting out of the U.S. They are based on HS codes and used by the U.S. Census Bureau to calculate trade statistics and by U.S. Customs and Border Protection to ensure that exporters are following U.S. export regulations.
Ship’s tackle: Equipment such as rigging or cranes used on a ship for loading or unloading cargo.
Shipper: In the context of international trade, shipper is a term typically used to identify the company selling the goods to a foreign market. The shipper may also be called the exporter or consignor in this case.
Shipper’s letter of instruction (SLI): A document provided by an exporting company to their freight forwarder outlining instructions for the freight forwarder. If the freight forwarder is filing through the Automated Export System (AES) on behalf of the exporter, the SLI includes the information they need to complete the filing. See also, 5 Reasons You Need a Shipper's Letter of Instruction for Your Exports.
Shipping documents: Paperwork that accompanies a shipment as it makes its way to the final destination, such as packing lists or bills of lading.
Shipping Solutions: An export documentation and compliance software program that makes creating accurate export documents fast and easy. See also, Shipping Solutions Features.
Shortage: When the number of units received is less than the quantity stated on the shipping documents. Opposite of overage.
Skids: Devices placed beneath boxes or packages in order to raise them off the floor to permit access by a forklift.
SNAP-R: Simplified Network Application Process—Redesign (SNAP-R) is a system maintained by the U.S. Commerce Department which enables U.S. companies to submit export license applications, commodity classification requests, reexport license applications, and license exception AGR notifications via the Internet.
SOLAS: Safety of Life at Sea Convention is enforced by the International Maritime Organization (IMO). Under SOLAS, exporters are required to provide a verified weight of the goods before they are loaded onto a ship for transport. See also, New Weight Verification Requirements Coming in July 2016.
Spotting: Placing a container in a position from which it can be loaded or unloaded.
Starboard: The right side of a ship (when facing forward.) Opposite of port.
Stern: The backside of a ship. Opposite of bow.
STC: Said to contain.
Stevedore: Individual or company that employs longshoremen and contracts for the loading and unloading of ships.
Stripping: Removing cargo from a container.
Stuffing: Putting cargo into a container.
STW: Said to weigh.
Supply chain: A system of interconnected organizations and activities involved in the movement of goods from a supplier to a customer.
Surcharge: An extra or additional charge.
Surtax: An extra or additional tax.
T:
Tail: Backside of a container or trailer. Opposite of front or nose.
Tare weight: The weight of a container while empty.
Terminal: Also called a container terminal, a location where containers are picked up, dropped off, maintained and kept.
Terminal charge: A charge for a service carried out in a carrier’s terminal area.
Third party logistics (3PL): A company that provides logistics services to other companies, such as warehousing and transportation.
TL: Trailer load.
Trailer: A container attached to the back end of a truck.
Trans-shipment: The transfer of cargo from one carrier to another or from one vehicle to another at an intermediate point during the goods’ journey to the final destination.
Truck tonnage: The weight (in tons) of a shipment transported by truck.
Turnaround: A term used in marine transportation referring to the time it takes between arrival of a ship and its departure.
U:
Ullage: The space not filled with liquid in a drum or tank.
Unclaimed freight: Freight that has not been called for or picked up by the owner or ultimate consignee.
Unit load: Packages loaded onto a pallet, in a crate, or in some other way that allows for the goods to be handled as a single unit. This process is called unitization.
UN number: An internationally recognized four-digit code used to identify dangerous goods. See also, Creating the ITA Dangerous Goods Form.
USMCA: On July 1, 2020, the United States-Mexico-Canada Agreement replaced NAFTA as the free trade agreement between the three countries. In Canada, it is officially known as the Canada–United States–Mexico Agreement (CUSMA) In Mexico, it is called the Tratado entre México, Estados Unidos y Canadá (T-MEC). Under USMCA, qualifying products are exempt from tariffs and quotas when traded between those three countries. To claim this preferential duty rate, you must determine if your goods qualify under the USMCA Rules of Origin. Download a free copy of the USMCA form.
USML: The United States Munitions List is a list of space- and defense-related products which are controlled by the U.S. Department of State under the International Traffic in Arms Regulations (ITAR). See also, What Exporters Need to Know about the U.S. Munitions List (USML).
USPPI: United States principal party of interest. The party that receives the primary benefit from an export transaction, monetary or otherwise. Usually the seller of the goods. See also, How to Determine the USPPI.
V:
Vessel: A seafaring vehicle; a boat or ship.
Vessel manifest: A document listing details regarding the crew and cargo onboard a vessel.
Vessel traffic service (VTS): A traffic monitoring system used by harbour or port authorities used to monitor ships, similar to air traffic control used to monitor aircraft.
W:
War risk: Insurance coverage for losses resulting from an act of war.
Warehouse: A place for the storage, consolidation and distribution of cargo. Warehousing is the storage of cargo.
Wharf: A structure built on the shore of a harbour which facilitates the docking of ships.
ACE: The Automated Commercial Environment is the online web portal used to report data to the Automated Export System (AES) for exports leaving the United States, and also for customs filing for imports entering the United States.
AES: The Automated Export System is the system used by the U.S. government to collect data on exports. This data is called Electronic Export Information (EEI) and in many cases exporters are legally required to file the EEI through AES for each shipment. The U.S. Census Bureau uses this data to calculate trade statistics such as gross domestic product (GDP), while U.S. Customs and Border Protection (CBP) uses it to make sure that exporters are following U.S. export regulations. See also, AES Filing Software by Shipping Solutions (Plus 20 Key Terms.
Aggregate shipment: Multiple shipments from different sellers to a single consignee that are consolidated by the carrier into a single shipment.
Air waybill (AWB): The AWB is a document that controls the routing of an exporter’s cargo while it is in the hands of the air carrier or a consolidator. It is a contract for carriage; however, it cannot be negotiated
ALADI: The Latin American Integration Association (ALADI) is an international association of Latin American countries. Its function in Latin America is comparable to the function of the former European Economic Community (which has now become embedded in the framework of the European Union) in Europe. The goal of ALADI is to harmonize trade across the member states. There are currently 13 member countries representing a total population of over 500 million people. ALADI has its own commodity classification system similar to the global Harmonized System (HS).
Alongside: Refers to the side of a ship. Goods delivered alongside are placed on the dock or barge within reach of the ship’s rigging so it can be easily loaded onto the ship. It’s used, for example, in the Incoterms 2010 trade term, Free Alongside Ship.
Apparent good order: When freight appears to be free of damage after being assessed it is said to be in apparent good order.
Arrival notice: Notification provided by the carrier when a shipment has arrived to the consignee or notify party.
Astern: Can either mean 1) behind a ship, or 2) to move a ship in reverse direction.
ATDNSHINC: Stands for “Any Time, Day or Night, Sundays and Holidays Included” referring to when a vessel will operate.
Athwartships: A direction across the width of a ship.
Audit trail: A system that stores and maintains records of business processes. With regards to exporting, companies are strongly encouraged to maintain an audit trail documenting their compliance screenings in order to be able to demonstrate due diligence in case of an audit. Having an audit trail can protect your company from fines or penalties in the case of an export compliance violation.
Automatic identification system (AIS): A satellite system used by ships and vessel tracking service (VTS) to identify and locate ships.
B:
Backhaul: Cargo carried on a return journey.
Balloon freight: Freight that is low weight but high volume (light but bulky.)
Beam: The width of a ship.
Beneficiary: The party that receives payment.
Bilateral: A bilateral agreement is one in which both parties agree to provide something for the other.
Bill of lading: A document issued by a carrier or their agent acknowledging receipt of cargo for shipment. Often abbreviated as BOL, BoL, B/L, or BL. If there were no issues with the cargo stated on the BOL, it is said to be a clean bill of lading. See also, 3 Things You Need to Know about the Bill of Lading Form.
Bill of sale: A document that confirms that transfer of goods in exchange for money.
Bill-to party: The party paying for goods or services in a transaction.
BIS: The Bureau of Industry and Security, an agency within the U.S. Department of Commerce tasked with enforcing the Export Administration Regulations (EAR).
Blocking or bracing: Wood or metal supports used to secure cargo while in transit. Also called dunnage.
Block stowage: Loading cargo close together to minimize movement of goods while in transit.
Bolster: A piece of equipment attached to a chassis or railcar in order to secure the container.
Bond port: The initial port of entry where a vessel transporting goods first arrives at a country.
Booking: Arrangements made with a carrier for the movement of cargo; space reservation.
Bow: The front of a vessel.
Broken stowage: Empty space in a container not occupied by cargo.
Bulk cargo: Cargo that is shipped loose as opposed to being shipped in packages or containers. Grain and coal are examples of goods usually shipped as bulk cargo.
Bull ring: A device attached to the floor of a container which is used to secure cargo.
C:
Cabotage: Transport of goods between two places in the same country by a transporter from another country.
Cargo: Any goods being transported, regardless of the mode of transport.
Cargo declaration: Information submitted prior to, upon arrival, or upon departure of an international shipment required by a country’s customs authority.
Cargo manifest: A document detailing the cargo carried on a ship, often provided to a customs authority.
Carnet: A document permitting the holder to temporarily send goods to certain foreign countries for display or demonstration purposes without having to pay duties. Check out, What is an ATA Carnet?
Cash on delivery (COD): The sale of goods in which payment is made upon delivery rather than in advance.
Carrier: A carrier is a party that transports goods for another person or company and is responsible for any possible loss of or damage to the goods during transport. A common carrier provides transportation services to the public in return for compensation. A contract carrier provides this service under special contracts, often for government clients.
CBP: Customs and Border Protection, part of the Department of Homeland Security, is the agency within the U.S. government tasked with controlling the flow of people and goods into and out of the country, and with enforcing import and export regulations.
CCC Mark: A label indicating cargo conforms to standards established by the Chinese government.
CCL: The Commerce Control List is a list of dual-use items (items that have both a commercial application as well as a potential military application) published as part of the U.S. Department of Commerce’s Export Administration Regulations (EAR). Each item on the CCL is identified with an Export Control Classification Number (ECCN). Knowing the right ECCN for your product plays a role in determining if you need an export license.
CE Mark: A label indicating cargo conforms to standards established by the European Union.
Certificate of free sale: This document indicates a particular product is marketed in the United States or is eligible for export, and that the particular manufacturer has no unresolved enforcement actions pending before or taken by the U.S. Food and Drug Administration (FDA). It is often used when exporting to countries whose regulatory agencies are not as well-developed as the United States’ FDA.
Certificate of inspection: A document certifying that merchandise is in good condition immediately prior to being shipped.
Certificate of origin: A document certifying where goods were originally made, often abbreviated as COO. A COO specific to a particular free trade agreement may be used to claim preferential duty treatment. A generic certificate of origin may be requested by the customs authority of the country of import, in which case the COO must be stamped by a chamber of commerce.
CFR: The Code of Federal Regulations is the codification of rules and regulations published in the U.S. Federal Register.
Chamber of commerce: An association of businesses that may serve several functions, including advocating or lobbying for their member companies, organizing business-related programming and events in their communities, and, perhaps most relevant for exporters, providing document certification services. See our article, The Chamber of Commerce and Export Documents: The Certificate of Origin.
Chassis: The base frame of a wheeled vehicle, used to secure a container prior to movement.
Chock: Material (often wood) placed next to cargo to prevent excessive movement of the cargo during transit in order to avoid damage.
CL: Abbreviation for carload or containerload.
Claim: In the context of logistics, a claim is a demand made by a customer to a transportation company for payment in order to compensate for loss or damage of goods.
CM and cm: CM (uppercase) stands for “cubic meters,” while cm (lowercase) stands for “centimeters.”
Commerce Country Chart: Part of the Export Administration Regulations (EAR) which helps exporters determine if they need to apply for an export license in order to ship a particular product to a particular country.
Commercial invoice: A fundamental document for an international transaction with details including what goods are being shipped, who is the shipper, and who is the ultimate consignee. Serves as the basis for all other documents related to the shipment.
Commodity: Any commercial good that is shipped.
Common law: Law that derives authority from precedent, custom and usage rather than from statutes, particularly regarding the laws of the United States, the United Kingdom, and countries formerly part of the British Empire.
Compliance: In the context of international shipping, being compliant or maintaining compliance means that the company in question is following all applicable laws and rules which govern their shipments. In this context the more specific terms regulatory compliance or trade compliance may be used to differentiate from other uses of the term, as the word compliance has other meanings in other contexts such as in the fields of medicine and psychology. A business practice that goes against specific laws is termed a compliance violation. See our article, What to Do When You Encounter Export Violations.
Concealed loss/concealed damage: Shortage of or damage to goods shipped that is not immediately evident upon delivery.
Connecting carrier: A carrier which acts as an intermediary between two or more other carriers.
Consignee: The person or place to whom a shipment will be transferred. The ultimate consignee is the final recipient of the goods, while an intermediate consignee takes possession of the goods for a portion of the time that they are in transit.
Consignment: A shipment of goods to a consignee.
Consignor: Refers to the exporter or shipper from which the goods originate.
Consolidation: When cargo from multiple shippers is combined in a single container.
Consul: A government official residing in a foreign country who represents the interests of their home country.
Consumption entry: When goods are imported into the United States without any time or use restrictions. The official U.S. Customs and Border Protection (CBP) website states that about 95% of all imports fall into this category.
Container: A truck trailer loaded with cargo that can be detached for loading onto a vessel or railcar. Different types of containers exist for different shipping needs. For example, a container may be ventilated, refrigerated, insulated, dehumidified, or equipped with special devices used to secure certain types of cargo. A container shipment is a large shipment, typically over 20,000 pounds.
Container load: A load large enough in volume or weight to fill a container.
Container manifest: A document stating the contents of a container, its point of origin and point of destination. Vessels may be required by law to produce a manifest for every container being transported.
Contraband: Prohibited cargo such as illegal drugs or unauthorized weapons.
Contract: A legally binding agreement between two or more parties.
C-TPAT: U.S. Customs and Border Protection established Customs-Trade Partnership Against Terrorism in November 2001 as a voluntary partnership to help ensure supply chain security. Meeting C-TPAT standards enables faster processing through customs inspections and formalities.
Cu.: Abbreviation for “cubic” used when describing measurements of volume.
Cube out: Refers to when a container or vessel has reached its volumetric capacity before reaching its weight capacity.
Customhouse: A government office where duties are paid and import and export paperwork are filed.
Customs: A customs authority, or customs for short, refers to the agency within a government that is responsible for collecting duties and enforcing import and export regulations.
Customs bonded warehouse: A warehouse authorized by customs to receive duty-free goods.
Customs broker: An individual or organization who helps a shipper navigate customs requirements.
Customs clearance: The process in which a customs authority assesses a shipment being imported in their country in order to ensure compliance with their country’s import regulations. A shipment that has been approved by the customs authority and allowed to enter the commerce of their country is said to have cleared customs.
Customs entry: Also called Entry Summary or Form 7501, is a document that provides US Customs and Border Protection (CBP) with details about a shipment being imported into the United States, such as value, classification, and origin. CBP uses the form to calculate duties owed.
Customs invoice: A document required by a country’s customs authority which serves the same purpose as a standard commercial invoice but also contains additional information such as a certificate of origin.
Customs of the port (COP): A phrase referring to local rules and practices which may impact a shipment.
Customs value only: Some shipments involve no actual monetary transaction between the exporter and the ultimate consignee, such as shipments for repair under warranty, or shipments of items used for display at trade shows. These shipments are still subject to duties and taxes, and exporters must list the monetary value of the items on the shipment on the customs invoice in order to enable the customs authority in the country of import to assess how much duty the importer must pay. In these cases, the exporter should include a customs value only statement on the invoice.
Cut-off time: The latest time cargo may be delivered to a terminal for loading.
D:
Dangerous goods: A product may be considered a dangerous good if it is corrosive, flammable, poisonous, toxic, explosive, etc. Shipping dangerous goods may require special documentation or packaging to ensure safety. See also, Hazardous Materials or Dangerous Goods?
Dangerous goods declaration: A dangerous goods declaration form is a document produced by an exporter providing details on the dangerous goods in their shipment. When shipping dangerous goods via air, a Dangerous Goods IATA Declaration form is required, and when shipping dangerous goods via sea, a Dangerous Goods IMO Declaration form is required.
Destination control statement: A legal statement put on an export export invoice that specifies that the goods are to be transferred to the ultimate consignee and no other party. Diversion to other countries or parties without prior authorization is a violation of U.S. law. Also called an anti-diversion clause.
DDTC: Directorate of Defence Trade Controls (DDTC) is the government agency within the U.S. Department of State tasked with enforcing the International Traffic in Arms Regulations (ITAR), which regulate the export of space- and defence-related products.
D&H: Abbreviation for “dangerous and hazardous” cargo.
DBA: Stands for “doing business as,” used to specify that a company is doing business under a certain registered name.
Deconsolidation point: Location where cargo is separated in preparation for delivery.
Deemed export: Transmission of controlled technology, source code, or information to a foreign national at home or abroad. Export regulations apply to deemed exports as well. See, Deemed Exports: Exporting Without Shipping a Product.
Delivery receipt: A document signed and dated by a consignee or their authorized agent confirming receipt of goods and stating the condition of the goods upon delivery.
Demurrage/detention: Demurrage is a charge to be paid by a shipper or consignee to the carrier as penalty for delaying the carrier’s cargo beyond the allowed free time. Detention is the same as demurrage except that instead of applying to delays in cargo, detention applies to delays in equipment.
Denied party screening: Also called restricted party screening or trade party screening, denied party screening is the process of screening potential customers, partners or vendors against denied party lists. These are lists of individuals or organizations that a government has identified as parties that one can’t do business with and that one may be penalized for doing business with. See also, Export Compliance: Understanding Restricted Party Screening.
Destination control statement: A legal statement put on a shipping document which specifies that the goods are to be transferred to the ultimate consignee and no other party. Diversion to other countries or parties without prior authorization is a violation of U.S. law. See also, What Is the Destination Control Statement and Why Should It Be on Your Commercial Invoice?
Discrepancy: When documents presented do not conform to the requirements of the letter of credit. Banks will not accept letters of credit which have discrepancies.
Diversion: Diversion refers either to 1) a change made to the route of a shipment or to the route of the entire vessel or 2) the transfer of goods from the intended end-user to some other party.
Dock: For road transportation, a platform from which trucks are loaded and unloaded. For sea transportation, a cargo handling area adjacent to the shoreline where a ship ties up.
Dock receipt: A document used to acknowledge receipt of cargo. Provides the framework for the preparation of an ocean bill of lading.
DOT: U.S. Department of Transportation. A U.S. agency within the executive branch which oversees transportation in the U.S.
Drawback: A partial refund of an import fee, usually given if goods are re-exported from the country which collected the fee.
Drayage: Transport of goods over a short distance. Some definitions specify that drayage is the transport of goods in which both the trip origin and destination are within the same urban area. Also called cartage.
Dumping: Importing goods into a country at a price less than the fair market value.
Dutiable value: The amount on which a customs duty is calculated.
Duties: Taxes collected on importing and exporting goods. Also called tariffs.
E:
EAR: The Export Administration Regulations are published by the U.S. Department of Commerce and regulate exports of dual-use items, meaning items that have both a commercial use as well as a potential military application.
ECCN: Export Control Classification Numbers are alphanumeric codes used to identify dual-use items, meaning items that have both a commercial use as well as a potential military application. Knowing the right ECCN for your product plays a role in determining if you need an export license.
EEI: Electronic export information is the data that exporters must report to the Automated Export System (AES) via the Automated Commercial Environment (ACE) online web portal. See also, Who is Responsible for Filing the Electronic Export Information (EEI)?
Electronic data interchange (EDI): The electronic transmission of business documents such as invoices, purchase orders, and bills of lading.
Embargoes: Sanctions are prohibitions designed to protect economic or national security and may include trade barriers, tariffs, and restrictions on financial transactions. Embargoes are similar but usually refer to more severe restrictions such as travel bans or blockades.
Eminent domain: The power of a sovereign government to take property for a necessary public use.
Empty repo: Stands for empty repositioning; refers to the movement of empty containers.
End-user: The ultimate recipient of a shipment. Generally synonymous with ultimate consignee. This may be different from the party being billed for the shipment.
Endorsement: A legal signature that signals transfer of rights from one party to another.
Equipment interchange receipt (EIR): A document used when transferring a container from one carrier to another, or from one terminal to another.
ERP: Enterprise resource planning (ERP) software helps companies with order-processing and accounting. Some ERP systems include international shipping or trade compliance modules, but these are often limited in their functionality. See our article, 6 Reasons Exporters are Frustrated with Their ERP’s Export Module.
ETA, ETC, ETD, ETR, ETS: Estimated time of arrival, completion, departure, readiness, or sailing.
Exception: A delivery in which the driver or recipient notes a problem on the delivery receipt before signing it is referred to as an exception. An exception is usually related to shortage or damage of goods.
Exclusive use: A shipper may pay a premium rate in order to obtain exclusive use of a trailer. This means that the container will only be filled with the shipper’s goods and not those of any other party, even if there is additional space on the trailer.
Export: Shipment of goods out of a country. Opposite of import.
Export compliance program: Often abbreviated ECP, an export compliance program is a company's written set of procedures for ensuring compliance when exporting. See our article, Your Company Needs an Export Compliance Program.
Export controls/import controls: Refers to licenses, permits, and other authorizations which may be required from a government in order to legally export or import something.
Export documentation software: A software tool used by a company to ensure consistency, efficiency and auditability in their export documentation and compliance process, such as Shipping Solutions.
Export license: A government-issued permit that authorizes a shipper to export a certain good or to export to a certain country or party. Download the free white paper, How to Determine if You Need an Export License.
Export management company: Exporting companies without their own export department sometimes outsource their export operations to an export management company (EMC).
F:
FAK: Abbreviation for “freight all kinds.” Typically refers to a full container loaded with mixed cargo.
False billing: Misrepresenting freight information on shipping documents.
Federal Maritime Commission (FMC): The agency within the U.S. federal government tasked with enforcing laws related to transport of goods by sea.
Federal Register: The Federal Register, sometimes abbreviated as Fed. Reg., FedReg, or FR, is the official journal of the U.S. government where new rules and regulations are published.
Force majeure: A common clause included in contracts which exempts parties for not fulfilling their obligations due to events beyond their control, such as natural disasters or war.
Fore and aft: The direction on a ship parallel to the center line.
Foreign trade zone: Areas in which commodities can be manufactured, modified or stored under specific customs regulations and generally not subject to customs duties. May be abbreviated FTZ and sometimes called a free trade zone or free port. See our article, Foreign Trade Zones: Advantages for Importers and Exporters.
FPPI: Foreign principal party of interest is the party to whom final delivery of the goods will be made; typically the foreign buyer.
Free time: The amount of time that a carrier’s equipment may be used without incurring additional charges.
Freight: Any product(s) being transported.
Freight broker: A person who arranges transportation on behalf of a shipper. Typically a freight broker will connect small shippers to carriers who can move their goods.
Freight forwarder: A company that arranges the transportation of goods on behalf of a shipper. A freight forwarder may have its own in-house carriers or may contract with external carriers. Freight forwarders often specialize in consolidating LTL freight from multiple shippers.
FTA: Free trade agreements are made between countries in an effort to reduce barriers to trade between the participating countries.
FTR: The Foreign Trade Regulations (FTR) are a set of regulations placed on international trade in the U.S. They are established and updated by the U.S. Census Bureau. It is in the FTR that the requirement to file the Electronic Export Information (EEI) through the Automated Export System (AES) can be found. See also, Why Is the Census Bureau Monitoring Your Exports?
Full truckload (FTL): A full truckload carrier is a carrier that contracts the entirety of a truck’s carrying capacity to a single customer. Often referred to as simply a truckload carrier.
G:
General order: When U.S. Customs orders shipments without entries to be kept in their custody.
Gross vehicle weight (GVW): The total weight of a vehicle including the weight of the vehicle itself and any attached containers.
H:
Harbour: A place at which ships stop to resupply and load or unload cargo.
Harbour master: An official responsible for overseeing the operations of a harbour.
Hatch: The opening on the deck of a ship which gives access to the cargo hold.
Hazardous materials (HazMat): May be used interchangeably with the term “dangerous goods,” hazardous materials (or HazMat for short) are goods which may pose a threat to safety because they are poisonous, toxic, corrosive, explosive, flammable, etc. More precisely, hazardous materials are defined by the U.S. Department of Transportation in accordance with the Federal Hazardous Material Law. It is more common to see the term “hazardous materials” used when shipping domestically within the U.S., whereas the term “dangerous goods” is used more often when shipping internationally. Shipping hazardous materials may require special documentation or packaging to ensure safety.
HMF: Harbour maintenance fee. See our article, A Case of HaruMpF and MumPF.
HS: The Harmonized System is an internationally accepted system used to classify products. The first six digits of an HS code are universal across all countries, but each country will add additional digits to further specify products.
HS codes play a role in determining import and export controls as well as duty rates.
The code for a particular product is often called its tariff classification, as is the process for finding the right code.
I:
IMDG: International Maritime Dangerous Goods code; the regulations established by the International Maritime Organization (IMO) for the international transport of dangerous goods.
Import: Shipment of goods into a country. Opposite of export.
Import declaration: Information submitted by an importer or their agent to their country’s customs authority before or upon importation of goods, such as the contact details of the importer, how the goods are being transported, and the tariff classifications and values of the items on the shipment.
Import license: A government-issued permit authorizing a party to import a good into the country.
In bond: An import or export shipment that has not yet cleared customs is referred to as in bond.
INCOTERMS: Incoterms are universal trade terms published by the International Chamber of Commerce (ICC.) They consist of three-letter codes that are intended to clearly communicate the tasks, costs and risks associated with the transportation and delivery of goods in an international transaction. They describe how responsibility is allocated between the seller and the buyer for different parts of the transaction. Download the free Incoterms 2020 Chart of Responsibilities and Transfer of Risk.
Interchange point: A location where freight is transferred from one carrier to another.
Intermodal: Intermodal transportation is the movement of goods via more than one type of transportation (e.g. air, rail, sea, truck, etc.) An intermodal container is one that can be used in different modes of transport without having to unload the goods and reload them at each point at which the mode of transport changes. In the context of international trade, intermodal container is usually synonymous with container.
Inward foreign manifest (IFM): A document listing all cargo entering a country. Required by all world ports and is the primary source from which import duties are assigned.
ITAR: The International Traffic in Arms Regulations regulate the export of space- or defence-related products and are enforced by the U.S. Department of State. See also, An Overview of the International Traffic in Arms Regulations (ITAR).
J:
JIT: Abbreviation for just in time. A method of inventory control which minimizes warehousing and in which the container itself acts as a movable warehouse and arriving on schedule is crucial.
L:
Laden: Loaded aboard a vessel.
Landed cost: The total cost of goods for a buyer including transportation costs and import duties.
Less-than-truckload, less-than-load (LTL): A medium shipment, typically between 150 pounds and 20,000 pounds. An LTL carrier mixes freight from several customers in a single truckload. May also be called less-than-container (LCL).
Letter of credit: Also called a documentary collection and often abbreviated as LC or L/C, a letter of credit is a written commitment by a bank issued after a request by an importer that payment will be made to an exporter provided that the terms of the letter of credit have been met as evidenced by the presentation of certain documents. See also, What's a Letter of Credit? (Infographic).
License exception: Certain criteria may be met that allow an exporter to export a product without an export license in cases where an export license would normally be required. These criteria are called license exceptions. See also, What You Need to Know about Export License Exceptions.
Liquidated damages: The penalty a seller must pay the buyer if a project does not meet the standards or deadline outlined in the sales contract.
List: The amount that a vessel tilts from the vertical, measured in degrees.
Logistics: The management of the flow of products as they are transported from the point of origin to their final destination. A logistics company is a general term for a company that provides logistics services, which may include freight forwarding, customs brokerage, and/or consulting services.
Longshoreman: A port employee tasked with loading and unloading ships.
M:
Malpractice: In the context of shipping, malpractice refers to situations in which a carrier illegally gives preference to a customer in order to attract their business.
Maritime: Relating to transport by sea.
Marking: Letters, numbers, or other symbols placed on packaging used for identification purposes.
Master bill of lading: A bill of lading issued by a carrier to a freight forwarder acknowledging receipt of container for shipment. This is different from a house bill of lading which is issued by a freight forwarder to a shipper, acknowledging receipt of their items for shipment.
MPF: Merchandise processing fee. See our article, A Case of HaruMpF and MumPF.
Multimodal: See Intermodal.
N:
NAFTA: The North American Free Trade Agreement was established in 1994 in order to harmonize trade between the United States, Canada and Mexico. Companies located in these countries may be eligible for reduced duty rates when importing if their goods qualify under the terms of NAFTA. NAFTA was replaced on July 1, 2020, by the United States-Mexico-Canada Agreement (USMCA).
NCBFAA: The National Customs Brokers and Forwarders Association of America is an organization representing the interests of customs brokers and freight forwarders in the U.S. They publish guidelines on best practices, including specific guidelines on how to create a shipper’s letter of instruction (SLI) when authorizing freight forwarders to file through the Automated Export System (AES) on behalf of the exporter.
NEC, NES: Not elsewhere classified, not elsewhere specified.
Negotiable/non-negotiable: A negotiable instrument is a document that can be transferred from its original holder to a third party. A non-negotiable document cannot be transferred to another party. An inland or ocean bill of lading may be either negotiable or non-negotiable; a bill of lading consigned “to order” or “to order of shipper” is negotiable once it is endorsed on the back by the shipper or their representative. Air waybills are always non-negotiable. See our article, The Bill of Lading Always Proves Shipment Ownership.
Net weight: The weight of goods not including the weight of their packaging.
Non-dumping certificate: Required by some countries to ensure protection against dumping of certain products.
NVOCC: A non-vessel operating common carrier behaves like a carrier except it doesn’t provide the actual transportation service itself. Instead, an NVOCC buys space from carriers and sells this space to shippers.
O:
On board: A notation on a bill of lading indicating that cargo has been loaded on a ship.
On deck: A notation on a bill of lading indicating that cargo has been stowed on the open deck of a ship.
Open account: A transaction in which goods are shipped to a foreign buyer without guarantee of payment.
Operating ratio: A measure of operating efficiency based on a comparison between a carrier’s operating expenses and its net sales.
Origin: Can mean 1) Location where a shipment starts its journey; or 2) Country where goods were originally manufactured.
Overage: When the number of units received is greater than the quantity stated on the export documents. Opposite of shortage.
P:
Packing list: A standard document which accompanies a shipment. Also called a packing slip, this document lists the products on a shipment along with packaging information but does not include prices. See also, The Importance of an Export Packing List for Your International Shipments.
Pallet: A platform on which packages may be loaded. Facilitates easier handling by a lift truck.
Parcel/package/small parcel/small package: A small shipment, typically below 150 pounds.
Payee: The party paid in a transaction; the seller.
Payer: The party paying money in a transaction; the buyer.
Payment terms: Terms that describe how money will be paid in a transaction. Typically, the shipper is responsible for payment for prepaid shipments, while the consignee is responsible for payment for collect shipments, unless a third party is indicated as the payor on the shipping documents.
Phytosanitary inspection certificate: A document issued by the U.S. Department of Agriculture which certifies that a shipment has been inspected and is free from harmful pests and plant diseases. Used to meet import requirements of other countries.
Pier: A structure perpendicular to the shoreline to which a ship is secured in order to load or unload cargo.
Place of delivery: Location where cargo leaves the custody of a carrier.
Place of receipt: Location where cargo enters the custody of a carrier.
POD: Abbreviation for 1) port of discharge; 2) port of destination; or 3) proof of delivery, a document provided by the carrier required to receive payment.
Point of origin: The location where a shipment is transferred from a shipper to a carrier.
POL: Abbreviation for 1) port of loading; or 2) petroleum, oil and lubricants.
Port: May refer to 1) A harbour with piers or docks; 2) The left side of a ship (when facing forward; opposite of starboard); or 3) An opening in the side of a ship used for handling freight.
Port of call: Port where a ship discharges or receives traffic.
Port of entry: Port where cargo is unloaded and enters a country.
Port of exit: Port where cargo is loaded and leaves a country.
PPI: Principal party of interest. See FPPI and USPPI.
Prepaid: Freight charges paid by a shipper prior to release of bills of lading by the carrier.
Proforma invoice: A document that acts as a formal quote, produced by the seller and given to the potential buyer before a transaction is finalized. See also, How Does the Proforma Invoice Fit in the Sales Process?
Q:
Quarantine: A restriction placed on an operation in order to protect public health and safety.
Quota: The quantity of goods that may be imported without restrictions over a set period of time.
Quotation: Usually called a quote for short, an offer to sell goods at a stated price under stated conditions.
R:
Rate basis: The formula of specific factors that play a role in determining freight rates.
RFP, RFQ: Request for proposal, request for quotation.
Reasonableness: Under ICC and common law, the requirement that a freight rate not be higher than what is necessary to reimburse the carrier and allow a fair profit.
Relay: The transfer of containers from one ship to another when both ships are controlled by the same carrier.
Remittance: Funds sent by one person to another as payment.
Revenue: Payment received by a carrier for transporting goods.
Roll-on/roll-off: Also called RORO or ro-ro for short, these are vessels designed to carry wheeled cargo, such as vehicles and trailers. This is in contrast to lift-on/lift off (LoLo) vessels which use a crane to load and unload cargo.
S:
Sanction: An embargo enforced by a government against another country.
SCAC: Standard Carrier Alpha Codes are codes developed by the National Motor Freight Traffic Association which are used to identify inland carriers in the U.S.
Schedule B: Schedule B codes are used specifically for exporting out of the U.S. They are based on HS codes and used by the U.S. Census Bureau to calculate trade statistics and by U.S. Customs and Border Protection to ensure that exporters are following U.S. export regulations.
Ship’s tackle: Equipment such as rigging or cranes used on a ship for loading or unloading cargo.
Shipper: In the context of international trade, shipper is a term typically used to identify the company selling the goods to a foreign market. The shipper may also be called the exporter or consignor in this case.
Shipper’s letter of instruction (SLI): A document provided by an exporting company to their freight forwarder outlining instructions for the freight forwarder. If the freight forwarder is filing through the Automated Export System (AES) on behalf of the exporter, the SLI includes the information they need to complete the filing. See also, 5 Reasons You Need a Shipper's Letter of Instruction for Your Exports.
Shipping documents: Paperwork that accompanies a shipment as it makes its way to the final destination, such as packing lists or bills of lading.
Shipping Solutions: An export documentation and compliance software program that makes creating accurate export documents fast and easy. See also, Shipping Solutions Features.
Shortage: When the number of units received is less than the quantity stated on the shipping documents. Opposite of overage.
Skids: Devices placed beneath boxes or packages in order to raise them off the floor to permit access by a forklift.
SNAP-R: Simplified Network Application Process—Redesign (SNAP-R) is a system maintained by the U.S. Commerce Department which enables U.S. companies to submit export license applications, commodity classification requests, reexport license applications, and license exception AGR notifications via the Internet.
SOLAS: Safety of Life at Sea Convention is enforced by the International Maritime Organization (IMO). Under SOLAS, exporters are required to provide a verified weight of the goods before they are loaded onto a ship for transport. See also, New Weight Verification Requirements Coming in July 2016.
Spotting: Placing a container in a position from which it can be loaded or unloaded.
Starboard: The right side of a ship (when facing forward.) Opposite of port.
Stern: The backside of a ship. Opposite of bow.
STC: Said to contain.
Stevedore: Individual or company that employs longshoremen and contracts for the loading and unloading of ships.
Stripping: Removing cargo from a container.
Stuffing: Putting cargo into a container.
STW: Said to weigh.
Supply chain: A system of interconnected organizations and activities involved in the movement of goods from a supplier to a customer.
Surcharge: An extra or additional charge.
Surtax: An extra or additional tax.
T:
Tail: Backside of a container or trailer. Opposite of front or nose.
Tare weight: The weight of a container while empty.
Terminal: Also called a container terminal, a location where containers are picked up, dropped off, maintained and kept.
Terminal charge: A charge for a service carried out in a carrier’s terminal area.
Third party logistics (3PL): A company that provides logistics services to other companies, such as warehousing and transportation.
TL: Trailer load.
Trailer: A container attached to the back end of a truck.
Trans-shipment: The transfer of cargo from one carrier to another or from one vehicle to another at an intermediate point during the goods’ journey to the final destination.
Truck tonnage: The weight (in tons) of a shipment transported by truck.
Turnaround: A term used in marine transportation referring to the time it takes between arrival of a ship and its departure.
U:
Ullage: The space not filled with liquid in a drum or tank.
Unclaimed freight: Freight that has not been called for or picked up by the owner or ultimate consignee.
Unit load: Packages loaded onto a pallet, in a crate, or in some other way that allows for the goods to be handled as a single unit. This process is called unitization.
UN number: An internationally recognized four-digit code used to identify dangerous goods. See also, Creating the ITA Dangerous Goods Form.
USMCA: On July 1, 2020, the United States-Mexico-Canada Agreement replaced NAFTA as the free trade agreement between the three countries. In Canada, it is officially known as the Canada–United States–Mexico Agreement (CUSMA) In Mexico, it is called the Tratado entre México, Estados Unidos y Canadá (T-MEC). Under USMCA, qualifying products are exempt from tariffs and quotas when traded between those three countries. To claim this preferential duty rate, you must determine if your goods qualify under the USMCA Rules of Origin. Download a free copy of the USMCA form.
USML: The United States Munitions List is a list of space- and defense-related products which are controlled by the U.S. Department of State under the International Traffic in Arms Regulations (ITAR). See also, What Exporters Need to Know about the U.S. Munitions List (USML).
USPPI: United States principal party of interest. The party that receives the primary benefit from an export transaction, monetary or otherwise. Usually the seller of the goods. See also, How to Determine the USPPI.
V:
Vessel: A seafaring vehicle; a boat or ship.
Vessel manifest: A document listing details regarding the crew and cargo onboard a vessel.
Vessel traffic service (VTS): A traffic monitoring system used by harbour or port authorities used to monitor ships, similar to air traffic control used to monitor aircraft.
W:
War risk: Insurance coverage for losses resulting from an act of war.
Warehouse: A place for the storage, consolidation and distribution of cargo. Warehousing is the storage of cargo.
Wharf: A structure built on the shore of a harbour which facilitates the docking of ships.